Integrated modeling for determining launch survival and limitations for actuated lightweight mirrors

Lucy E. Cohan; David W. Miller

doi:10.1117/12.789079

12 July 2008 Integrated modeling for determining launch survival and limitations of actuated lightweight mirrors

Lucy E. Cohan, David W. Miller

Author Affiliations +

Proceedings Volume 7010, Space Telescopes and Instrumentation 2008: Optical, Infrared, and Millimeter; 70102I (2008) https://doi.org/10.1117/12.789079
Event: SPIE Astronomical Telescopes + Instrumentation, 2008, Marseille, France

Abstract

The future of space telescopes lies in large, lightweight, segmented aperture systems. Segmented apertures eliminate manufacturability and launch vehicle fairing diameter as apertures size constraints. Low areal density, actuated segments allow the systems to meet both launch mass restrictions and on-orbit wavefront error requirements. These systems, with silicon carbide as a leading material, have great potential for increasing the productivity, affordability, and manufacturability of future space-based optical systems. Thus far, progress has been made on the manufacturing, sensing, actuation, and on-orbit control of such systems. However, relatively little attention has been paid to the harsh environment of launch. The launch environment may dominate aspects of the design of the mirror segments, with survivability requirements eliminating many potentially good designs. Integrated modeling of a mirror segment can help identify trends in mirror geometries that maximize launch performance, ensuring survivability without drastically over designing the mirror. A finite element model of a single, ribbed, actuated, silicon carbide mirror segment is created, and is used to develop a dynamic, state-space model, with launch load spectra as disturbance inputs, and mirror stresses as performance outputs. The parametric nature of this model allows analysis of many geometrically different mirror segments, helping to identify key parameters for launch survival. The modeling method described herein will enable identification of the design decisions that are dominated by launch, and will allow for development of launch-load alleviation techniques to further push the areal density boundaries in support of the creation of larger and lighter mirrors than previously possible.

Citation Download Citation

Lucy E. Cohan and David W. Miller "Integrated modeling for determining launch survival and limitations of actuated lightweight mirrors", Proc. SPIE 7010, Space Telescopes and Instrumentation 2008: Optical, Infrared, and Millimeter, 70102I (12 July 2008); https://doi.org/10.1117/12.789079

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE