Paper
22 July 2008 Seismic hazard: analysis and design of large ground-based telescopes
Author Affiliations +
Abstract
This paper will discuss analysis and design of large ground based telescopes for seismic hazard. Seismic hazard is an important issue for both the observatory and the telescope structure. Properly defined seismic specifications are vital. These specifications should include performance objective that matches performance levels and probabilistic based hazard levels for operational and survival conditions. The paper will discuss specific tools that utilize results of existing seismic hazard assessment programs and can be used for initial seismic assessment during site selection. In the final stage of site selection, site specific probabilistic seismic-hazard studies that account for local geological settings and active faults should be used. The results of these site specific studies usually include response spectra and time history records in horizontal and vertical directions for operational and survival conditions. Different methods to analyze the telescope structure for seismic loadings, such as, equivalent static analysis, response spectrum analysis, linear and nonlinear time history analysis, are discussed. Devices that mitigate seismic forces and/or deformations are also presented.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Frank W. Kan and Joseph Antebi "Seismic hazard: analysis and design of large ground-based telescopes", Proc. SPIE 7012, Ground-based and Airborne Telescopes II, 70122E (22 July 2008); https://doi.org/10.1117/12.791243
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Earthquakes

Optical instrument design

Hazard analysis

Observatories

Optical isolators

Spectrum analysis

Back to Top