Paper
11 July 2008 LBT report activities concerning the optomechanics alignment of the Large Binocular Camera's Red Channel
Author Affiliations +
Abstract
In this article activities on the Optomechanics of the Prime Focus Red Channel alignment are described from the moment in which the instrument left Italy to be shipped to LBT site to the moment in which it has been successfully placed on the second LBT arm. An overview is given, starting from the realization of a "clean laboratory" at LBT, going through the alignment check and finally with the mounting operations of the instrument at the telescope and its alignment with the "second eye" primary mirror, with tolerances good enough to perform the fine alignment on the sky with the telescope Active Optics.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Gentile, R. Ragazzoni, E. Diolaiti, J. Farinato, J. Hill, R. Bertam, and A. Baruffolo "LBT report activities concerning the optomechanics alignment of the Large Binocular Camera's Red Channel", Proc. SPIE 7014, Ground-based and Airborne Instrumentation for Astronomy II, 70144U (11 July 2008); https://doi.org/10.1117/12.790499
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

CCD cameras

Cameras

Optical alignment

Optomechanical design

Lenses

Back to Top