Extraction of trench geometry and linewidth of nanoscale grating targets in (110)-oriented silicon using angle-resolved scatterometry

Heather J. Patrick; Thomas A. Germer; Michael W. Cresswell; Bin Li; Huai Huang; Paul S. Ho

doi:10.1117/12.796286

9 September 2008 Extraction of trench geometry and linewidth of nanoscale grating targets in (110)-oriented silicon using angle-resolved scatterometry

Heather J. Patrick, Thomas A. Germer, Michael W. Cresswell, Bin Li, Huai Huang, Paul S. Ho

Author Affiliations +

Proceedings Volume 7042, Instrumentation, Metrology, and Standards for Nanomanufacturing II; 70420B (2008) https://doi.org/10.1117/12.796286
Event: NanoScience + Engineering, 2008, San Diego, California, United States

Abstract

The extraction of nanoscale dimensions and feature geometry of grating targets using signature-based optical techniques is an area of continued interest in semiconductor manufacturing. In the current work, we have performed angle-resolved scatterometry measurements on grating targets of 180 nm pitch fabricated by electron beam lithography and anisotropic wet etching of (110)-oriented silicon. The use of oriented silicon results in grating lines with nominally vertical sidewalls, with linewidths estimated by scanning electron microscopy (SEM) to be in the sub-50 nm range. The targets were designed to be suitable for both optical scatterometry and small-angle x-ray scattering (SAXS) measurement. As a consequence of the lattice-plane selective etch used for fabrication, the target trenches do not have a flat bottom, but rather have a wide vee shape. We demonstrate extraction of linewidth, line height, and trench profile using scatterometry, with an emphasis on modeling the trench angle, which is well decoupled from other grating parameters in the scatterometry model and is driven by the crystalline orientation of the Si lattice planes. Issues such as the cross-correlation of grating height and linewidth in the scatterometry model, the limits of resolution for angle-resolved scatterometry at the wavelength used in this study (532 nm), and prospects for improving the height and linewidth resolution obtained from scatterometry of the targets, are discussed.

Citation Download Citation

Heather J. Patrick, Thomas A. Germer, Michael W. Cresswell, Bin Li, Huai Huang, and Paul S. Ho "Extraction of trench geometry and linewidth of nanoscale grating targets in (110)-oriented silicon using angle-resolved scatterometry", Proc. SPIE 7042, Instrumentation, Metrology, and Standards for Nanomanufacturing II, 70420B (9 September 2008); https://doi.org/10.1117/12.796286

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available