Paper
29 March 2011 Experimental analysis of biasing elements for dielectric electro-active polymers
Micah Hodgins, Stefan Seelecke
Author Affiliations +
Abstract
This paper presents an experimental investigation of three different, small profile and scalable DEAP actuators. These actuators are designed for use in small scale pumping and valve applications. The actuators used in this paper consist of a biasing element (either a mass, linear spring, or a non-linear spring) coupled with a circular dielectric electro-active polymer (DEAP). These mechanisms bias the DEAP allowing out-of-plane actuation when the voltage is cycled. A constant force input, a linear spring, and a non-linear spring are separately tested as the biasing element of a circular/diaphragm DEAP. Tests are systematically performed at various DEAP pre-deflections, biasing stiffness and electrical loading rates. The displacement stroke performance of each test is examined and analyzed. It was found that the non-linear spring provided the largest displacement stroke over two other biasing elements. It also showed better performance at higher electrical loading rates. Thus, of the three types of biasing tested the non-linear spring shows most promise for use in fluid pump/valve applications. Future work will include optimizing this biasing element for the current DEAP design.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Micah Hodgins and Stefan Seelecke "Experimental analysis of biasing elements for dielectric electro-active polymers", Proc. SPIE 7976, Electroactive Polymer Actuators and Devices (EAPAD) 2011, 797639 (29 March 2011); https://doi.org/10.1117/12.883555
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Electroactive polymers

Dielectrics

Chemical elements

Neodymium

Sensors

Signal processing

Back to Top