Paper
2 November 2011 Metrological analysis of the human foot: 3D multisensor exploration
Author Affiliations +
Abstract
In the podiatry field, many of the foot dysfunctions are mainly generated due to: Congenital malformations, accidents or misuse of footwear. For the treatment or prevention of foot disorders, the podiatrist diagnoses prosthesis or specific adapted footwear, according to the real dimension of foot. Therefore, it is necessary to acquire 3D information of foot with 360 degrees of observation. As alternative solution, it was developed and implemented an optical system of threedimensional reconstruction based in the principle of laser triangulation. The system is constituted by an illumination unit that project a laser plane into the foot surface, an acquisition unit with 4 CCD cameras placed around of axial foot axis, an axial moving unit that displaces the illumination and acquisition units in the axial axis direction and a processing and exploration unit. The exploration software allows the extraction of distances on three-dimensional image, taking into account the topography of foot. The optical system was tested and their metrological performances were evaluated in experimental conditions. The optical system was developed to acquire 3D information in order to design and make more appropriate footwear.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Muñoz Potosi, J. Meneses Fonseca, and J. León Téllez "Metrological analysis of the human foot: 3D multisensor exploration", Proc. SPIE 8011, 22nd Congress of the International Commission for Optics: Light for the Development of the World, 80117Q (2 November 2011); https://doi.org/10.1117/12.903272
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CCD cameras

Calibration

3D image processing

3D modeling

3D acquisition

Cameras

Metrology

RELATED CONTENT

Low-cost structured-light based 3D capture system design
Proceedings of SPIE (March 06 2014)
Measurement error analysis of the 3D four-wheel aligner
Proceedings of SPIE (October 10 2013)
Self calibration of a 3D object scanner based on a...
Proceedings of SPIE (December 14 1998)
A measurement error evaluation method of videometrics
Proceedings of SPIE (August 18 2011)
A new planar pattern for camera calibration
Proceedings of SPIE (September 24 2011)

Back to Top