Investigation of standoff explosives detection via photothermal/photoacoustic interferometry

Pak S. Cho; Robert M. Jones; Timothy Shuman; Daniel Scoglietti; Geof Harston

doi:10.1117/12.883027

3 June 2011 Investigation of standoff explosives detection via photothermal/photoacoustic interferometry

Pak S. Cho, Robert M. Jones, Timothy Shuman, Daniel Scoglietti, Geof Harston

Proceedings Volume 8018, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XII; 80181T (2011) https://doi.org/10.1117/12.883027
Event: SPIE Defense, Security, and Sensing, 2011, Orlando, Florida, United States

Abstract

Progress in standoff detection of surface-bound explosives residue using photothermal and photoacoustic (PT/PA) imaging and spectroscopy has been reported recently. Photothermal/photoacoustic interferometry (PTI), a variation of the aforementioned techniques, is a candidate for standoff detection as a result of its non-contact and non-destructive approach. In PTI, the transient PT/PA hydrodynamic response produced by impulsive infra-red laser excitation(s) are detected by an overlapping focused probe laser beam. The return back-scattered/reflected probe laser beam is collected and coupled into a single-mode optical fiber. The PT/PA-induced perturbation on the return probe laser, in the form of phase or amplitude modulation or both, is extracted interferometrically. The resulting quadrature signals are digitized and processed to recover the minute PT/PA dynamics above background noise. Characteristic spectra for materials can be obtained by quantifying the PT response as a function of excitation(s) wavelength. The CW probe laser, operating in the 1550 nm range, and the constituents of the coherent detection system are commercial off-the-shelf components. A commercially available and continuously tunable quantum cascade laser (QCL) with output pulse energies up to 50 nJ was employed to generate the PT/PA spectra in the 8.8-10.2 μm range. PTI detected absorption spectra were collected for HMX, RDX, and PETN, with the probe laser system positioned 5 meters away from the explosives targets. In addition, PTI measurements of the stimulated Raman (SR) spectra of ammonium nitrate and 2,4,6-trinitrotoluene obtained using a near-IR OPO laser are described. We believe this is the first-ever application of photothermal techniques to the measurement of the SR effect on solid explosive materials at meaningful standoff distances.

Citation Download Citation

Pak S. Cho, Robert M. Jones, Timothy Shuman, Daniel Scoglietti, and Geof Harston "Investigation of standoff explosives detection via photothermal/photoacoustic interferometry", Proc. SPIE 8018, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XII, 80181T (3 June 2011); https://doi.org/10.1117/12.883027

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available