Paper
23 August 2011 Design and fabrication of integrated optical 1×8 power splitter in SOI substrate using large cross-section single-mode waveguides
Author Affiliations +
Proceedings Volume 8173, Photonics 2010: Tenth International Conference on Fiber Optics and Photonics; 81730C (2011) https://doi.org/10.1117/12.898475
Event: International Conference on Fiber Optics and Photonics, 2010, Guwahati, India
Abstract
An integrated optical 1x8 power splitter has been designed and fabricated using large cross-section single-mode rib waveguides (input/output) in SOI substrate. The fabricated devices have been characterized in terms of excess loss, insertion loss and uniformity in transmitted powers at each of the output ports. The corresponding typical values are found to be 7 dB, 15 dB, and 0.7 dB, respectively. A prototype 1x8 power splitter has been fiber pigtailed, packaged and also characterized. The characterization results suggest that such power splitter (with further improved design parameters) can be potentially useful in passive/active optical networks operating in the communication window of λ ~ 1550 nm.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Solomon Krubhakar I., Narendran R., and B K. Das "Design and fabrication of integrated optical 1×8 power splitter in SOI substrate using large cross-section single-mode waveguides", Proc. SPIE 8173, Photonics 2010: Tenth International Conference on Fiber Optics and Photonics, 81730C (23 August 2011); https://doi.org/10.1117/12.898475
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Integrated optics

Silicon

Polarization

Prototyping

Stars

Beam propagation method

Back to Top