Paper
23 February 2012 Optimising the detection parameters for deep-tissue photoacoustic imaging
Author Affiliations +
Abstract
For deep tissue photoacoustic imaging, piezoelectric ultrasound detectors with large element sizes (>1mm) and relatively low centre frequencies (<5MHz) are generally used, as they can provide the required high sensitivity to achieve imaging depths of several centimetres. However, these detectors are generally not optimised in terms of element size and bandwidth. To identify these parameters in order to improve SNR and spatial resolution, two models were employed. The first was a numerical model and was used to investigate the effect of varying the detector element size on the amplitude and SNR of photoacoustic images. The second model was used to optimise the detector bandwidth. For this, the frequency content of simulated photoacoustic signals were studied for a range of depths and acoustic source sizes. The model was based on an analytical solution to the wave equation for a cylindrical source and incorporated the effects of frequency dependent acoustic attenuation. These models provide a new framework for optimising the design of photoacoustic scanners for breast and other deep tissue imaging applications.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. J. Allen and P. C. Beard "Optimising the detection parameters for deep-tissue photoacoustic imaging", Proc. SPIE 8223, Photons Plus Ultrasound: Imaging and Sensing 2012, 82230P (23 February 2012); https://doi.org/10.1117/12.908813
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Acoustics

Photoacoustic spectroscopy

Signal to noise ratio

Signal attenuation

Tissue optics

Chemical elements

Back to Top