Design and test of a novel cost-effective piezo driven actuator with a two-stage flexure amplifier for chopping mirrors

Qingguo Wu; Dehua Yang; Aihua Li; Guohua Zhou; Bintang Yang

doi:10.1117/12.925834

13 September 2012 Design and test of a novel cost-effective piezo driven actuator with a two-stage flexure amplifier for chopping mirrors

Qingguo Wu, Dehua Yang, Aihua Li, Guohua Zhou, Bintang Yang

Author Affiliations +

Proceedings Volume 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II; 84505G (2012) https://doi.org/10.1117/12.925834
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

A fast chopping secondary mirror is the critical functioning assembly in an astronomical telescope for infrared observation. Normally, a chopping mirror is driven by precision high-load and high-stiffness linear actuators which are expected to be lightweight, compact and further cost-effective. The stroke of the actuator is typically required to up to several hundred microns with typical load capacity up to several hundred Newtons. We developed a novel piezo-based prototype linear actuator with a two-stage rhombic flexure amplifier. In this paper, first we present the detail design scheme of the actuator by analytical calculations with comprehensive Finite Element Analysis (FEA) verification. Afterwards, we also present the procedures and results of tests of linearity, load capacity, eigenfrequency, stability and repeatability. The selected piezoelectric drive unit is a block of 35x10x10 mm³ with output force up to 4000 N. The two-stage displacement amplifier is simply integrated by two identical singular rhombic flexures orthogonally mounted together. Each stage, one rhombic flexure with a longer axis of 76 mm long, is designed with an ideal amplification ratio of 3, which leads to a final theoretical compound amplification ration of 9. In order to realize the basic triangular-amplification principle in a rhombic flexure, we introduced flexure joints at all the eight ends of its four edge bars. The singular rhombic flexures can be efficiently manufactured by electrical discharge wire-cutting process at a time in batch by being overlapped in layers. Afterwards we carried out related measurements to test its performance.

Citation Download Citation

Qingguo Wu, Dehua Yang, Aihua Li, Guohua Zhou, and Bintang Yang "Design and test of a novel cost-effective piezo driven actuator with a two-stage flexure amplifier for chopping mirrors", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84505G (13 September 2012); https://doi.org/10.1117/12.925834

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available