Development of locally resonant structures for sonic barriers

Andrew Hall; Emilio Calius; George Dodd; K. L. Chan

doi:10.1117/12.2024999

17 April 2013 Development of locally resonant structures for sonic barriers

Andrew Hall, Emilio Calius, George Dodd, K. L. Chan

Proceedings Volume 8695, Health Monitoring of Structural and Biological Systems 2013; 86953M (2013) https://doi.org/10.1117/12.2024999
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

The intrusion of unwanted sound is a matter of increasing concern worldwide as growing sound pollution impacts human health, productivity and wellbeing. Lower frequency noise is particularly important, as this is where the human ear is most sensitive. Irritating acoustic intrusion increasingly occurs in buildings, yet sound insulation at low frequencies is challenging and expensive. Meta-materials o er a relatively new approach to achieving sound and vibration isolation. This approach is being used to develop panels with internal resonant structures that are only a few centimetres thick yet strongly interact with acoustic waves. These structures can yield signi cantly greater transmission loss than conventional insulation systems. Numerical models based on networks of single-degree of freedom oscillators were used to understand how the components of the locally resonant structure (LRS) can be manipulated to generate sound transmission loss (STL) performance spectrums. Designs with the desired STL characteristics were then examined in detail and samples were fabricated using industry-standard materials and processes. This paper focuses on the acoustic testing of these LRS samples at low frequencies. Comparisons were made between, numerical predictions and experimental results (small scale (plane wave) to large scale (di use eld) conditions). The highest performing network arrangements combined layers of resonators with multiple resonances to increase system bandwidth. At frequencies below 1 kHz the samples yielded large attenuation gains with peaks of 80dB under normal incidence, and good correspondence to modelling predictions. In di use eld conditions the samples still showed signi cant STL improvements above that of a conventional panel over bandwidths in the order of 300 Hz. The resulting systems have the potential to provide signi cantly higher transmission loss at low frequencies than conventional wall systems of similar size and weight.

Citation Download Citation

Andrew Hall, Emilio Calius, George Dodd, and K. L. Chan "Development of locally resonant structures for sonic barriers", Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 86953M (17 April 2013); https://doi.org/10.1117/12.2024999

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available