Optical device for the improvement of positioning accuracy in large machine tools

L. Cocola; M. Fedel; M. Mocellin; R. Casarin; L. Poletto

doi:10.1117/12.2020288

13 May 2013 Optical device for the improvement of positioning accuracy in large machine tools

L. Cocola, M. Fedel, M. Mocellin, R. Casarin, L. Poletto

Proceedings Volume 8788, Optical Measurement Systems for Industrial Inspection VIII; 87882D (2013) https://doi.org/10.1117/12.2020288
Event: SPIE Optical Metrology 2013, 2013, Munich, Germany

Abstract

The very large machine tools now available for applications ranging from aerospace to composite material castings present a new set of challenges when trying to match the traditional machining accuracies of the mechanical workshop. An optical system for the automatic recalibration of the machine during the machining process has been developed. While conventional linear and rotary optical encoders are used to control axes positioning, and their resolution is already more than compliant with the needed accuracies, our optical system provides a further error signal during operation in order to compensate for structural deformations of axis and sliding parts. Those signals are used in order to reach a global positioning error vector under 50 microns on a 3-axis translation stage. The system has been installed on a test machine, with a total range on the 3-axis of 3, 1.6 and 1.2 meters. The device increases ranging measurement accuracy by decreasing the dependence of the position to the temperature variation and other deformations. To achieve such results, collimated diode lasers and 2D position-sensing devices have been installed to the machine. In order to provide signals which are least affected by electrical noise, transimpedance amplifiers and analog to digital converters have been integrated close to the detectors. The tests performed on the prototype demonstrate the capability of mapping the actual distance from the ideal linear translation with an error of 25 um along the full axis travel for a tracing capability of ±3.5 mm in both directions on each of the three detectors. This result is within the requirements of the end users, manufactures of travelling column type boring and milling machines.

Citation Download Citation

L. Cocola, M. Fedel, M. Mocellin, R. Casarin, and L. Poletto "Optical device for the improvement of positioning accuracy in large machine tools", Proc. SPIE 8788, Optical Measurement Systems for Industrial Inspection VIII, 87882D (13 May 2013); https://doi.org/10.1117/12.2020288

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available