Implantable CMOS imaging device with absorption filters for green fluorescence imaging

Yoshinori Sunaga; Makito Haruta; Hironari Takehara; Yasumi Ohta; Mayumi Motoyama; Toshihiko Noda; Kiyotaka Sasagawa; Takashi Tokuda; Jun Ohta

doi:10.1117/12.2038948

5 March 2014 Implantable CMOS imaging device with absorption filters for green fluorescence imaging

Yoshinori Sunaga, Makito Haruta, Hironari Takehara, Yasumi Ohta, Mayumi Motoyama, Toshihiko Noda, Kiyotaka Sasagawa, Takashi Tokuda, Jun Ohta

Author Affiliations +

Proceedings Volume 8928, Optical Techniques in Neurosurgery, Neurophotonics, and Optogenetics; 89280L (2014) https://doi.org/10.1117/12.2038948
Event: SPIE BiOS, 2014, San Francisco, California, United States

Abstract

Green fluorescent materials such as Green Fluorescence Protein (GFP) and fluorescein are often used for observing neural activities. Thus, it is important to observe the fluorescence in a freely moving state in order to understand neural activities corresponding to behaviors. In this work, we developed an implantable CMOS imaging device for in-vivo green fluorescence imaging with efficient excitation light rejection using a combination of absorption filters. An interference filter is usually used for a fluorescence microscope in order to achieve high fluorescence imaging sensitivity. However, in the case of the implantable device, interference filters are not suitable because their transmission spectra depend on incident angle. To solve this problem we used two kinds of absorption filters that do not have angle dependence. An absorption filter consisting of yellow dye (VARYFAST YELLOW 3150) was coated on the pixel array of an image sensor. The rejection ratio of ideal excitation light (490 nm) against green fluorescence (510 nm) was 99.66%. However, the blue LED as an excitation light source has a broad emission spectrum and its intensity at 510 nm is 2.2 x 10^-2 times the emission peak intensity. By coating LEDs with the emission absorption filters, the intensity of the unwanted component of the excitation light was reduced to 1.4 x 10^-4. Using the combination of absorption filters, we achieved excitation light transmittance of 10^-5 onto the image sensor. It is expected that high-sensitivity green fluorescence imaging of neural activities in a freely moving mouse will be possible by using this technology.

Citation Download Citation

Yoshinori Sunaga, Makito Haruta, Hironari Takehara, Yasumi Ohta, Mayumi Motoyama, Toshihiko Noda, Kiyotaka Sasagawa, Takashi Tokuda, and Jun Ohta "Implantable CMOS imaging device with absorption filters for green fluorescence imaging", Proc. SPIE 8928, Optical Techniques in Neurosurgery, Neurophotonics, and Optogenetics, 89280L (5 March 2014); https://doi.org/10.1117/12.2038948

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available