Focal spot measurements using a digital flat panel detector

Amit Jain; A. Panse; Daniel R. Bednarek; Stephen Rudin

doi:10.1117/12.2043057

19 March 2014 Focal spot measurements using a digital flat panel detector

Amit Jain, A. Panse, Daniel R. Bednarek, Stephen Rudin

Proceedings Volume 9033, Medical Imaging 2014: Physics of Medical Imaging; 90335F (2014) https://doi.org/10.1117/12.2043057
Event: SPIE Medical Imaging, 2014, San Diego, California, United States

Abstract

Focal spot size is one of the crucial factors that affect the image quality of any x-ray imaging system. It is, therefore, important to measure the focal spot size accurately. In the past, pinhole and slit measurements of x-ray focal spots were obtained using direct exposure film. At present, digital detectors are replacing film in medical imaging so that, although focal spot measurements can be made quickly with such detectors, one must be careful to account for the generally poorer spatial resolution of the detector and the limited usable magnification. For this study, the focal spots of a diagnostic x-ray tube were measured with a 10-μm pinhole using a 194-μm pixel flat panel detector (FPD). The twodimensional MTF, measured with the Noise Response (NR) Method was used for the correction for the detector blurring. The resulting focal spot sizes based on the FWTM (Full Width at Tenth Maxima) were compared with those obtained with a very high resolution detector with 8-μm pixels. This study demonstrates the possible effect of detector blurring on the focal spot size measurements with digital detectors with poor resolution and the improvement obtained by deconvolution. Additionally, using the NR method for measuring the two-dimensional MTF, any non-isotropies in detector resolution can be accurately corrected for, enabling routine measurement of non-isotropic x-ray focal spots. This work presents a simple, accurate and quick quality assurance procedure for measurements of both digital detector properties and x-ray focal spot size and distribution in modern x-ray imaging systems.

Citation Download Citation

Amit Jain, A. Panse, Daniel R. Bednarek, and Stephen Rudin "Focal spot measurements using a digital flat panel detector", Proc. SPIE 9033, Medical Imaging 2014: Physics of Medical Imaging, 90335F (19 March 2014); https://doi.org/10.1117/12.2043057

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available