A novel miniature thermomagnetic energy harvester

Chin-Chung Chen; Tien-Kan Chung; Chi-Cheng Cheng; Chia-Yuan Tseng

doi:10.1117/12.2045294

9 March 2014 A novel miniature thermomagnetic energy harvester

Chin-Chung Chen, Tien-Kan Chung, Chi-Cheng Cheng, Chia-Yuan Tseng

Proceedings Volume 9057, Active and Passive Smart Structures and Integrated Systems 2014; 90570X (2014) https://doi.org/10.1117/12.2045294
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

Nowadays, thermal-energy-harvesting is an important research topic for powering wireless sensors. Among numerous thermal-energy-harvesting approaches, some researchers demonstrated novel thermomagnetic-energy harvesters to convert a thermal-energy from an ambient temperature-difference to an electrical-output to power the sensors. However, the harvesters are too bulky to be integrated with the sensors embedded in tiny mechanical-structures for some structuralhealth- monitoring applications. Therefore, miniaturized harvesters are needed. Hence, we demonstrate a miniature thermomagnetic-energy harvester. The harvester consists of CuBe-beams, PZT-piezoelectric-sheet, Gd-soft-magnet, NdFeB-hard-magnet, and mechanical-frame. The piezoelectric-sheet and soft-magnet is bounded at fixed-end and freeend of the beams, respectively. The mechanical-frame assembles the beams and hard-magnet. The length×width×thickness of the harvester is 2.5cm×1.7cm×1.5cm. According to this, our harvester is 20-times smaller than the other harvesters. In the initial-state of the energy-harvesting, the beams’ free-end is near the cold-side. Thus, the soft-magnet is cooled lower than its curie temperature (Tc) and consequently changed from paramagnetic to ferromagnetic. Therefore, a magnetic-attractive force is produced between the soft-magnet and hard-magnet. Consequently, the beams/soft-magnet are down-pulled toward the hard-magnet fixed on the hot-side. The soft-magnet closing to the hot-side is heated higher than its Tc and subsequently changed to paramagnetic. Consequently, the magnetic-force is eliminated thus the beams are rebounded to the initial-state. Hence, when the harvester is under a temperature-difference, the beams’ pulling-down/back process is cyclic. Due to the piezoelectric effect, the piezoelectric-sheet fixed on the beams continuously produces voltage-response. Under the temperature-difference of 29°C, the voltage-response of the harvester is 30.4 mV with an oscillating-frequency of 0.098 Hz.

Citation Download Citation

Chin-Chung Chen, Tien-Kan Chung, Chi-Cheng Cheng, and Chia-Yuan Tseng "A novel miniature thermomagnetic energy harvester", Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems 2014, 90570X (9 March 2014); https://doi.org/10.1117/12.2045294

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available