Paper
21 February 2014 Backscattered signal modulation and emitting module design for a cloud lidar
Xiaowen Shu, Zhenyi Chen, Xu Lian, Hui Jin, Xiaofu Zhang
Author Affiliations +
Abstract
The cloud lidar, with the character of high precision and good stability, is an effective way to detect the cloud height. Pulse diode laser (PLD), as an essential part of the lidar system, needs the triggering pulse. In this paper, the emitting part of the lidar is studied,including the simulation of the backscatter SNR, the choose of the PLD and the design of trigging circuit to drive the 905nm PLD with the consideration of the optical system. A circuit for trigging the laser pulse with adjustable power and pulse width is contrived. Then the software Systemview is used to emulate the design and finally the making of PCB is finished. The results show whatever the parameters of the pulse, namely trigging pulse width, the rising edge, dithering , all these can be qualified to be in use in the practice and enjoys the merits of the low cost and convenience. The emitting module operates well.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaowen Shu, Zhenyi Chen, Xu Lian, Hui Jin, and Xiaofu Zhang "Backscattered signal modulation and emitting module design for a cloud lidar", Proc. SPIE 9142, Selected Papers from Conferences of the Photoelectronic Technology Committee of the Chinese Society of Astronautics: Optical Imaging, Remote Sensing, and Laser-Matter Interaction 2013, 91422F (21 February 2014); https://doi.org/10.1117/12.2057303
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Clouds

LIDAR

Signal to noise ratio

Semiconductor lasers

Pulsed laser operation

Clocks

Backscatter

RELATED CONTENT


Back to Top