Paper
5 August 2015 OSNR monitoring based on the correction to the error of OSNR for coherent optical systems
Author Affiliations +
Abstract
We propose a novel method for optical signal-to-noise ratio (OSNR) monitoring by the correction to the error of OSNR in high speed coherent optical communication systems. We calculate the total power and the total noise power by the real and imaginary part of the coherent detection signal. Then, the error of OSNR is corrected by a polynomial function. The simulation results demonstrate that, with the input power of 0.0dBm and 2.0dBm of 15-35GB QPSK optical fiber communication systems, the error of estimated OSNR is in the range of ±1dB with the reference OSNR of 15-25dB.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jingyue Xu, Aiying Yang, and Lihui Feng "OSNR monitoring based on the correction to the error of OSNR for coherent optical systems", Proc. SPIE 9619, 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, 96190X (5 August 2015); https://doi.org/10.1117/12.2193531
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Error analysis

Signal detection

Signal to noise ratio

Interference (communication)

Visualization

Calibration

Coherent optics

Back to Top