Helicopter engine exhaust rotor downwash effects on laser beams

Markus Henriksson; Lars Sjöqvist; Dirk Seiffer

doi:10.1117/12.2194815

27 October 2015 Helicopter engine exhaust rotor downwash effects on laser beams

Markus Henriksson, Lars Sjöqvist, Dirk Seiffer

Proceedings Volume 9650, Technologies for Optical Countermeasures XII; and High-Power Lasers 2015: Technology and Systems; 96500M (2015) https://doi.org/10.1117/12.2194815
Event: SPIE Security + Defence, 2015, Toulouse, France

Abstract

The hot exhaust gases from engines on helicopters are pushed down by the rotor in a turbulent flow. When the optical path of a laser beam or optical sensor passes through this region severe aberrations of the optical field may result. These perturbations will lead to beam wander and beam distortions that can limit the performance of optical countermeasure systems. To quantify these effects the Italian Air Force Flight Test Centre hosted a trial for the “Airborne platform effects on lasers and warning sensors” (ALWS) EDA-project. Laser beams were propagated from the airport control tower to a target screen in a slant path with the helicopter hovering over this path. Collimated laser beams at 1.55-, 2- and 4.6-μm wavelength were imaged with high speed cameras. Large increases in beam wander and beam divergence were found, with beam wander up to 200 μrad root-mean-square and increases in beam divergence up to 1 mrad. To allow scaling to other laser beam parameters and geometries formulas for propagation in atmospheric turbulence were used even though the turbulence may not follow Kolmogorov statistics. By assuming that the plume is short compared to the total propagation distance the integrated structure parameter through the plume could be calculated. Values in the range 10^-10 to 10^-8 m^1/3 were found when the laser beams passed through the exhaust gases below the helicopter tail. The integrated structure parameter values calculated from beam wander were consistently lower than those calculated from long term spot size, indicating that the method is not perfect but provides information about order of magnitudes. The measured results show that the engine exhaust for worst case beam directions will dominate over atmospheric turbulence even for kilometer path lengths from a helicopter at low altitude. How severe the effect is on system performance will depend on beam and target parameters.

Citation Download Citation

Markus Henriksson, Lars Sjöqvist, and Dirk Seiffer "Helicopter engine exhaust rotor downwash effects on laser beams", Proc. SPIE 9650, Technologies for Optical Countermeasures XII; and High-Power Lasers 2015: Technology and Systems, 96500M (27 October 2015); https://doi.org/10.1117/12.2194815

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available