Improving material decomposition by spectral optimization of photon counting computed tomography

C. Polster; K. Hahn; R. Gutjahr; F. Schöck; S. Kappler; O. Dietrich; T. G. Flohr

doi:10.1117/12.2216711

25 March 2016 Improving material decomposition by spectral optimization of photon counting computed tomography

C. Polster, K. Hahn, R. Gutjahr, F. Schöck, S. Kappler, O. Dietrich, T. G. Flohr

Proceedings Volume 9783, Medical Imaging 2016: Physics of Medical Imaging; 97831O (2016) https://doi.org/10.1117/12.2216711
Event: SPIE Medical Imaging, 2016, San Diego, California, United States

Abstract

Photon counting detectors in computed tomography facilitate measurements of spectral distributions of detected X-ray quanta in discrete energy bins. Along with the dependency on wavelength and atomic number of the mass attenuation coefficient, this information allows for reconstruction of CT images of different material bases. Decomposition of two materials is considered standard in today’s dual-energy techniques. With photon-counting detectors the decomposition of more than two materials becomes achievable. Efficient detection of CT-typical X-ray spectra is a hard requirement in a clinical environment. This is fulfilled by only a few sensor materials such as CdTe or CdZnTe. In contrast to energy integrating CT-detectors, the pixel dimensions must be reduced to avoid pulse pile-up problems at clinically relevant count rates. However, reducing pixel sizes leads to increased K-escape and charge sharing effects. As a consequence, the correlation between incident and detected X-ray energy is reduced. This degradation is quantified by the detector response function. The goal of this study is to improve the achievable material decomposition by adapting the incident X-ray spectrum with respect to the properties (i.e. the detector response function) of a photon counting detector. A significant improvement of a material decomposition equivalent metric is achievable when using specific materials as X-ray pre-filtration (K-edge filtering) while maintaining the applied patient dose and image quality.

Citation Download Citation

C. Polster, K. Hahn, R. Gutjahr, F. Schöck, S. Kappler, O. Dietrich, and T. G. Flohr "Improving material decomposition by spectral optimization of photon counting computed tomography", Proc. SPIE 9783, Medical Imaging 2016: Physics of Medical Imaging, 97831O (25 March 2016); https://doi.org/10.1117/12.2216711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available