1 April 1994 Thin-film photosensor design for liquid crystal spatial light modulators
Pierre R. Barbier, Li Wang, Garret Moddel
Author Affiliations +
Abstract
Liquid crystal (LC) spatial light modulators (SLMs) are addressed optically with semiconductor thin-film photosensors incorporated into the devices. Nematic LCs, which are insensitive to the polarity of the applied voltage, are addressed by optically modifying the effective resistance of the photosensors to be much smaller than or much larger than a threshold value. Much faster ferroelectric LCs, which are polarity sensitive, are addressed by supplying sufficient photogenerated charge. Because the spatial resolution of the devices decreases rapidly with increasing mobility of carriers at the photosensor/LC interface, very low mobilities, less than 1 cm2 V-1 s-1, are required. Photodiodes of hydrogenated amorphous silicon in p-i-n, Schottky, and metal insulator semiconductor configurations form practical photosensors for optically addressed SLMs. Thin-film photoconductors, having nonblocking contacts, cannot be used in many cases because of their large dark currents.
Pierre R. Barbier, Li Wang, and Garret Moddel "Thin-film photosensor design for liquid crystal spatial light modulators," Optical Engineering 33(4), (1 April 1994). https://doi.org/10.1117/12.166935
Published: 1 April 1994
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optically addressed spatial light modulators

Liquid crystals

Switches

Photodiodes

Photoresistors

Thin films

Dielectrics

Back to Top