Factory characterization testing of a large precision hexapod for the LMT/GTM

David R. Smith; Kamal Souccar; David M. Gale; Maribel Lucero Álvarez; Emilio Hernández Rios; Arak Olmos Tapia; Marcos Emir Moreno Nolasco; Matthieu Cuq; Pierre Noire; Romain Pawlowski; Thierry Roux

doi:10.1117/12.2311674

10 July 2018 Factory characterization testing of a large precision hexapod for the LMT/GTM

David R. Smith, Kamal Souccar, David M. Gale, Maribel Lucero Álvarez, Emilio Hernández Rios, Arak Olmos Tapia, Marcos Emir Moreno Nolasco, Matthieu Cuq, Pierre Noire, Romain Pawlowski, Thierry Roux

Author Affiliations +

Proceedings Volume 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III; 1070649 (2018) https://doi.org/10.1117/12.2311674
Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States

Abstract

As part of the telescope completion plan, the Large Millimeter Telescope (LMT/GTM) project replaced the hexapod positioner for the secondary (M2) mirror. The new hexapod was provided by Symetrie of Nimes, France. The particular challenges for the LMT/GTM hexapod are that it is both large and precise. After completion of the fabrication and internal contractor verification of the system, the project conducted a series of characterization tests, both at the fabrication facility and at the telescope site. During the factory tests, the project team tested the hexapod in both vertical and horizontal positions, verifying the motion range, accuracy, repeatability, and velocity, all at the maximum operational payload. Additionally, the team performed verification checks on the stiffness of the hexapod. The results were excellent, with calibrated errors of less than 5 microns in the translation degrees of freedom and less than 1 arcsec in the rotations, which was at the limit of the metrology of the tests. Following the successful factory test, the system was transported to the telescope site and the tests were repeated. While the calibration step was not performed during the site tests, the raw results were comparable to the factory values, clearing the way for installation on the telescope. The new hexapod was installed, along with a new M2 mirror, in the Fall of 2017 in advance of the LMT/GTM’s first observing season as a 50 m telescope. This paper presents the test program, the metrology approach, the characterization tests, the calibration method, and the final factory acceptance test results.

Citation Download Citation

David R. Smith, Kamal Souccar, David M. Gale, Maribel Lucero Álvarez, Emilio Hernández Rios, Arak Olmos Tapia, Marcos Emir Moreno Nolasco, Matthieu Cuq, Pierre Noire, Romain Pawlowski, and Thierry Roux "Factory characterization testing of a large precision hexapod for the LMT/GTM", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 1070649 (10 July 2018); https://doi.org/10.1117/12.2311674

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available