Paper
30 December 1993 Considerations for producing single-pulse fiber Bragg gratings
Charles G. Askins, Martin A. Putnam, Glen M. Williams, E. Joseph Friebele
Author Affiliations +
Proceedings Volume 2071, Distributed and Multiplexed Fiber Optic Sensors III; (1993) https://doi.org/10.1117/12.165911
Event: Optical Tools for Manufacturing and Advanced Automation, 1993, Boston, MA, United States
Abstract
The discussion of Bragg fiber gratings (FBGs) has expanded sharply in the last six years. FBGs were given versatility by the results at the United Technology Research Center when the technique of side-writing was pioneered (1989), which made the Bragg wavelength independent of the writing laser. The promise of economical production of these devices was advanced by the generation of FBGs with a single laser pulse at the Naval Research Laboratory (1992), and this result was expanded by the University of Southhampton in achieving saturated reflectivity with a single-pulse. The basis for manufacturing these excitingly versatile devices is near the point of supporting a new area of applications and industry. The intent of this article is to briefly discuss the conditions and requirements for the practical production of FBGs in support of the technology of distributed sensing.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Charles G. Askins, Martin A. Putnam, Glen M. Williams, and E. Joseph Friebele "Considerations for producing single-pulse fiber Bragg gratings", Proc. SPIE 2071, Distributed and Multiplexed Fiber Optic Sensors III, (30 December 1993); https://doi.org/10.1117/12.165911
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Modulation

Reflectivity

Sensors

Optical design

Scattering

Analytical research

Back to Top