Paper
11 July 1997 Progress in the development of far-ultraviolet etalons
Author Affiliations +
Abstract
We report on a continuing program to develop and test reflecting coatings suitable for use in Fabry-Perot etalons operating in the far ultraviolet region of the spectrum. UV etalons are of particular interest for solar studies as they have the potential to enable one to make wide-field high resolution diagnostic images such as spectroheliograms, dopplergrams, and density maps in isolated spectral lines formed in the upper chromosphere, transition region and lower corona. The performance of the high-efficiency coatings required by a UV etalon is limited both by the availability of suitable materials, and by the uniformity and accuracy of the deposition process. The lack of UV transmitting materials with a wide range of refractive index is especially troublesome. The latter problem may be partially overcome by using a vacuum-spaced etalon design. A vacuum-spaced etalon with cultured quartz plates was successfully operated at 160 nm in a previous study. In this study, we investigated a family of coating designs based on the fluoride salts of magnesium and lanthanum, finding that usable etalon performance may be achievable at wavelengths as short as 120 nm. Results of theoretical predictions and the performance of test coatings are presented. This work was supported by NASA under contract NASW-5007.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marilyn E. Bruner, Jean-Pierre Wuelser, Muamer Zukic, and Richard B. Hoover "Progress in the development of far-ultraviolet etalons", Proc. SPIE 3113, Grazing Incidence and Multilayer X-Ray Optical Systems, (11 July 1997); https://doi.org/10.1117/12.278874
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fabry–Perot interferometers

Optical coatings

Reflectivity

Ultraviolet radiation

Multilayers

Magnesium fluoride

Calibration

Back to Top