Paper
1 September 1998 Application of dry etching process on high-end Cr photomasks
Keuntaek Park, Kyu-Yong Lee
Author Affiliations +
Abstract
As the design pattern size at photomask is rapidly down to sub-micron, photomask manufacturing face up the situation developed unfavorably who has been enjoyed the long vacation with the 5X reticle through the prematured wet process. Also the wet etching process, the traditional process of photomasks is faced the limitation of resolution, linearity and corner rounding. The isotropic etching through the chemical reaction under the photoresist on wet etching process suggest the resolution limitation of typical wet etching process around 1.0 micrometers +/- 0.2 micrometers . The poor corner rounding and linearity is also considered as the major spot o f wet etching process. As explained, the resolution limitation of wet process has been hindered the application in present semiconductors market and, in addition, far from the demand of 0.18 micrometers design rule. On this paper, we reviewed the comparison of dry and wet etching process result to clarify the possible improvements through the dry etching. And based on this comparison we set possible way of improvements at the conclusion.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keuntaek Park and Kyu-Yong Lee "Application of dry etching process on high-end Cr photomasks", Proc. SPIE 3412, Photomask and X-Ray Mask Technology V, (1 September 1998); https://doi.org/10.1117/12.328814
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dry etching

Wet etching

Etching

Photomasks

Critical dimension metrology

Chromium

Plasma etching

RELATED CONTENT

EUVL mask manufacturing: technologies and results
Proceedings of SPIE (November 07 2005)
Evaluation of loading effect of NLD dry etching
Proceedings of SPIE (July 19 2000)
Advanced Cr dry etching process
Proceedings of SPIE (August 25 1999)
Cr and TaN absorber mask etch CD performance study for...
Proceedings of SPIE (December 27 2002)

Back to Top