Replication of diffractive gratings using embossing into UV-cured photopolymers

Niculae Dumbravescu; Mihaela Ilie

doi:10.1117/12.360528

31 August 1999 Replication of diffractive gratings using embossing into UV-cured photopolymers

Niculae Dumbravescu, Mihaela Ilie

Proceedings Volume 3879, Micromachine Technology for Diffractive and Holographic Optics; (1999) https://doi.org/10.1117/12.360528
Event: Symposium on Micromachining and Microfabrication, 1999, Santa Clara, CA, United States

Abstract

The original diffraction grating was fabricated using a well known Si anisotropic etching technique. By means of this micromachined Si stamper it is possible to transfer its surface-relief profile into a dry negative resist film. The transfer is performed during an embossing process which contains the following steps: In the first step, the dry photosensitive film having 1.5 mils thick, commonly used in PCB fabrication, is laminated onto a quartz UV transparent glass. After that, the protective cover sheet is removed from the laminated substrate, and the Si stamper is placed on the free surface of the photopolymer film. Next, the shimmed sandwich is loaded at the embossing temperature of 115 degree(s)C into a vacuum UV contact printing unit, while a moderate external pressure is applied, during aprox 5 second. The embossed information layer is then firmly bonded to the substrate, and the embossing is made permanent by ultraviolet radiation curing. This treatment consists of exposing the photopolymer, through the transparent substrate, at a UV broad band light source, with a hardening dose of at least 2500 mJ/cm². Finally, the vacuum is stopped, the sandwich is removed from the exposing unit, and the assembly is separated by slightly flexing, obtaining the permanent complementary replica of the stamper. This fabrication method, tested only for diffraction grating replicas, has also great potential in batch production of many other low-cost integrated optical components.

Citation Download Citation

Niculae Dumbravescu and Mihaela Ilie "Replication of diffractive gratings using embossing into UV-cured photopolymers", Proc. SPIE 3879, Micromachine Technology for Diffractive and Holographic Optics, (31 August 1999); https://doi.org/10.1117/12.360528

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available