Development of a red VCSEL-to-plastic fiber module for use in parallel optical data links

John D. Lambkin; T. Calvert; Brian Corbett; Jon Woodhead; Steven M. Pinches; Alexander Onischenko; Terry E. Sale; Jeff Hosea; Peter Van Daele; Koen Van de Putte; An Van Hove; Adriaan Valster; John Gerard McInerney; Pierpaolo A. Porta

doi:10.1117/12.384366

1 May 2000 Development of a red VCSEL-to-plastic fiber module for use in parallel optical data links

John D. Lambkin, T. Calvert, Brian Corbett, Jon Woodhead, Steven M. Pinches, Alexander Onischenko, Terry E. Sale, Jeff Hosea, Peter Van Daele, Koen Van de Putte, An Van Hove, Adriaan Valster, John Gerard McInerney, Pierpaolo A. Porta

Author Affiliations +

Proceedings Volume 3946, Vertical-Cavity Surface-Emitting Lasers IV; (2000) https://doi.org/10.1117/12.384366
Event: Symposium on Integrated Optoelectronics, 2000, San Jose, CA, United States

Abstract

This paper presents results that have emerged from the European funded ESPRIT Project, Bright Red Surface Emitting Lasers (BREDSELS-23455). The project's main objective has been to develop arrays of Vertical Cavity Surface Emitting Lasers (VCSEL's) emitting in the region of 650 nm. These VCSEL arrays, suitably coupled to plastic fiber ribbon, are potentially ideal sources for high-speed plastic optical fiber networks. Linear 1 X 8 VCSEL arrays have been fabricated from wafers grown in multi-wafer MOVPE reactors. Individual VCSELs are shown to generate a peak room temperature power of 2 mW at 674 nm and are capable of operating continuous wave to a temperature of 60 degrees Celsius. The use of selective oxidation in the fabrication process is found to be essential in terms of providing effective heat sinking to the active region, while free carrier absorption is found to be a significant loss mechanism. A detailed description of the device results including modal behavior is presented along with the initial results from the plastic fiber ribbon module.

Citation Download Citation

John D. Lambkin, T. Calvert, Brian Corbett, Jon Woodhead, Steven M. Pinches, Alexander Onischenko, Terry E. Sale, Jeff Hosea, Peter Van Daele, Koen Van de Putte, An Van Hove, Adriaan Valster, John Gerard McInerney, and Pierpaolo A. Porta "Development of a red VCSEL-to-plastic fiber module for use in parallel optical data links", Proc. SPIE 3946, Vertical-Cavity Surface-Emitting Lasers IV, (1 May 2000); https://doi.org/10.1117/12.384366

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE