Paper
6 December 2006 Measurements of micro-focus spot size in x-ray tubes and Kumakhov lenses
V. Ya. Shovkun
Author Affiliations +
Proceedings Volume 5943, X-ray and Neutron Capillary Optics II; 59431B (2006) https://doi.org/10.1117/12.638017
Event: X-ray and Neutron Capillary Optics II, 2004, Zvenigorod, Russian Federation
Abstract
X-ray lenses and X-ray tubes that are produced at IRO in collaboration with other companies should be certified in accordance with standards. In the report, five different measurement techniques for experimental estimation of focal spot sizes in X-ray tubes are considered. They are: the pinhole, the slit, the edge, the scanning and the grid-wire methods. The same techniques can be used for experimental estimation of focal spot sizes in X-ray lenses. Some experiments and numerical simulation have been performed to estimate accuracy of the above methods. We are developing a simple and reliable wire method. The arrangement consists of an X-ray tube under investigation (or an X-ray tube and an X-ray lens under investigation), a set of W-wires with diameters from 0.03mm to 0.3mm, and X-ray detectors (the CCD- camera, scintillation or semiconductor detector). Agreement between the wire and edge methods ofmeasurements is rather good, while three others give only rough estimations when we used them for measuring focal spots in the range from 0.01mm to 0.05mm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. Ya. Shovkun "Measurements of micro-focus spot size in x-ray tubes and Kumakhov lenses", Proc. SPIE 5943, X-ray and Neutron Capillary Optics II, 59431B (6 December 2006); https://doi.org/10.1117/12.638017
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Sensors

X-ray detectors

Lenses

X-ray sources

CCD cameras

Tungsten

RELATED CONTENT


Back to Top