Paper
14 October 2005 Design and fabrication of multi-foil hard x-ray telescope for space observations
Author Affiliations +
Abstract
Hard X-ray telescope by means of optics is one of the key technologies for future X-ray observatory programs. Introducing a telescope to hard X-ray region above 10 keV will improve sensitivity by one or two orders of magnitude. The principle of hard X-ray telescope is a depth-graded multilayer (supermirror) and high throughput, nested thin-foil grazing incidence optics. We have successfully developed a hard X-ray telescope sensitive up to 50 keV for balloon program InFOCuS. Effective area of 50 cm2 at 30 keV and image quality of 2.5 arcmin (HPD) were obtained from ground-based measurement and were also confirmed by in-flight calibration. Recent development achieved an improvement of image quality roughly by a factor of two. Japan's future X-ray satellite program NeXT has been proposed based on our technology.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasushi Ogasaka, Koujun Yamashita, Ryo Shibata, and Keisuke Tamura "Design and fabrication of multi-foil hard x-ray telescope for space observations", Proc. SPIE 5962, Optical Design and Engineering II, 59621T (14 October 2005); https://doi.org/10.1117/12.625116
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-ray telescopes

Space telescopes

Hard x-rays

Reflectivity

X-rays

Reflectors

Reflection

RELATED CONTENT


Back to Top