Feedback flow to improve model-based OPC calibration test patterns

Walid A. Tawfic; Mohamed Al-Imam; Karim Madkour; Rami Fathy; Ir Kusnadi; George E. Bailey

doi:10.1117/12.712843

28 March 2007 Feedback flow to improve model-based OPC calibration test patterns

Walid A. Tawfic, Mohamed Al-Imam, Karim Madkour, Rami Fathy, Ir Kusnadi, George E. Bailey

Proceedings Volume 6521, Design for Manufacturability through Design-Process Integration; 65211J (2007) https://doi.org/10.1117/12.712843
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

Process models are responsible for the prediction of the latent image in the resist in a lithographic process. In order for the process model to calculate the latent image, information about the aerial image at each layout fragment is evaluated first and then some aerial image characteristics are extracted. These parameters are passed to the process models to calculate wafer latent image. The process model will return a threshold value that indicates the position of the latent image inside the resist, the accuracy of this value will depend on the calibration data that were used to build the process model in the first place. The calibration structures used in building the models are usually gathered in a single layout file called the test pattern. Real raw data from the lithographic process are measured and attached to its corresponding structure in the test pattern, this data is then applied to the calibration flow of the models. In this paper we present an approach to automatically detect patterns that are found in real designs and have considerable aerial image parameters differences with the nearest test pattern structure, and repair the test patterns to include these structures. This detect-and-repair approach will guarantee accurate prediction of different layout fragments and therefore correct OPC behavior.

Citation Download Citation

Walid A. Tawfic, Mohamed Al-Imam, Karim Madkour, Rami Fathy, Ir Kusnadi, and George E. Bailey "Feedback flow to improve model-based OPC calibration test patterns", Proc. SPIE 6521, Design for Manufacturability through Design-Process Integration, 65211J (28 March 2007); https://doi.org/10.1117/12.712843

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available