Selective wet etching of AlInN layers for nitride-based MEMS and photonic device structures

Ian M. Watson; Chang Xiong; Erdan Gu; Martin D. Dawson; Francesco Rizzi; Katarzyna Bejtka; Paul R. Edwards; Robert W. Martin

doi:10.1117/12.781881

24 April 2008 Selective wet etching of AlInN layers for nitride-based MEMS and photonic device structures

Ian M. Watson, Chang Xiong, Erdan Gu, Martin D. Dawson, Francesco Rizzi, Katarzyna Bejtka, Paul R. Edwards, Robert W. Martin

Author Affiliations +

Proceedings Volume 6993, MEMS, MOEMS, and Micromachining III; 69930E (2008) https://doi.org/10.1117/12.781881
Event: SPIE Photonics Europe, 2008, Strasbourg, France

Abstract

Processing of GaN-AlInN-GaN epitaxial trilayers into 3-dimensional microstructures, using a combination of vertical dry etching and lateral wet etching, is discussed. The AlInN layers were grown so as to have an InN mole fraction close to the value of 17% required for lattice matching with GaN. Inductively coupled plasma etching with chlorine-argon gas mixtures was used to define mesa features with near-vertical sidewalls. Refluxing aqueous solutions of nitric acid of 2 molar concentration allowed highly selective lateral etching of the AlInN interlayers exposed on the mesa sidewalls, providing a novel sacrificial layer technology for the III-nitride materials. Lateral etch rates of 0.14-0.21 μm/hr were observed for 100-nm AlInN interlayers. Two distinct applications are discussed. In one example, lateral etching of an AlInN layer was used to expose the underside of epitaxial GaN disks for fabrication of planar microcavities. Here, retention of an optically smooth GaN (000₁) surface on the underside of the disks is critical. Microbridges with potential for development as sensors were also demonstrated, and the deformation of these structures provides a sensitive probe of the local strain state of the undercut GaN layer.

Citation Download Citation

Ian M. Watson, Chang Xiong, Erdan Gu, Martin D. Dawson, Francesco Rizzi, Katarzyna Bejtka, Paul R. Edwards, and Robert W. Martin "Selective wet etching of AlInN layers for nitride-based MEMS and photonic device structures", Proc. SPIE 6993, MEMS, MOEMS, and Micromachining III, 69930E (24 April 2008); https://doi.org/10.1117/12.781881

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available