Micro-motion exposure method based on PZT piezoelectric ceramics

Wenjun Sun; Mei-heng Zhang; Zhong Meng

doi:10.1117/12.834827

24 August 2009 Micro-motion exposure method based on PZT piezoelectric ceramics

Wenjun Sun, Mei-heng Zhang, Zhong Meng

Proceedings Volume 7381, International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors; 73810D (2009) https://doi.org/10.1117/12.834827
Event: International Symposium on Photoelectronic Detection and Imaging 2009, 2009, Beijing, China

Abstract

There mainly is laser digital photofinishing technique and digital photofinishing technique based on LCD consisting of TFT and LCOS in the digital photofinishing field at the present time. The former have a good many merit such as wide color gamut, high processing rate, large output size and high brightness, but his cost is very high, his maintain technique being comparatively complex, that result in difficult use for people. The utilization ratio of the latter is low because of lower resolution and lower aperture ratio for LCD, but the digital photofinishing based on LCD have lower cost and higher utilization ration, being suitable for people's current standard of living. Considering above mentioned problem, a micro-motion exposure method based on PZT piezoelectric ceramics used in digital image photofinishing is presented. The two-dimension micro-motion exposure system consisting of PZT piezoelectric ceramics, LCD panel, polarizing film and spring strip is designed. By means of PZT piezoelectric ceramics the LCD panel is removed about the one half of the pixel size of the LCD panel for four times from the original place, at the same time imaging system is exposed four times at the printing paper. The software is used to control the time synchronization, the exposure time and motion range of the LCD panel. The system has advantages such as shorter response time than 0.1seconds, lesser motion error than 0.01 microns, high stability and repeatability. Experimental results show that the proposed micro-motion exposure method improve the picture brightness and enlarge output size, at the meantime reducing the cost of the system.

Citation Download Citation

Wenjun Sun, Mei-heng Zhang, and Zhong Meng "Micro-motion exposure method based on PZT piezoelectric ceramics", Proc. SPIE 7381, International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors, 73810D (24 August 2009); https://doi.org/10.1117/12.834827

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

LCDs

Ferroelectric materials

Ceramics

Digital photography

Computing systems

Image processing

Printing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years