The limits and extensibility of optical patterned defect inspection

Richard M. Silver; Bryan M. Barnes; Yeungjoon Sohn; Richard Quintanilha; Hui Zhou; Chris Deeb; Mark Johnson; Milton Goodwin; Dilip Patel

doi:10.1117/12.850935

1 April 2010 The limits and extensibility of optical patterned defect inspection

Richard M. Silver, Bryan M. Barnes, Yeungjoon Sohn, Richard Quintanilha, Hui Zhou, Chris Deeb, Mark Johnson, Milton Goodwin, Dilip Patel

Author Affiliations +

Proceedings Volume 7638, Metrology, Inspection, and Process Control for Microlithography XXIV; 76380J (2010) https://doi.org/10.1117/12.850935
Event: SPIE Advanced Lithography, 2010, San Jose, California, United States

Abstract

New techniques recently developed at the National Institute of Standards and Technology using bright-field optical tools are applied to signal-based defect analysis of features with dimensions well below the measurement wavelength. A key to this approach is engineering the illumination as a function of angle and analysis of the entire scattered field. In this paper we demonstrate advantages using this approach for die-to-die defect detection metrology. This methodology, scatterfield optical microscopy (SOM), is evaluated for defect inspection of several defect types defined by Sematech on the Defect Metrology Advisory Group (DMAG) intentional defect array (IDA) wafers. We also report the systematic evaluation of defect sensitivity as a function of illumination wavelength. Theoretical simulations are reported that were carried out using a fully three-dimensional finite difference time domain (FDTD) electromagnetic simulation package. Comprehensive modeling was completed investigating angle-resolved illumination to enhance the detection of several defect types from the IDA wafer designs. The defect types covered a variety of defects from the IDA designs. The simulations evaluate the SOM technique on defect sizes ranging from those currently measurable to those the industry considers difficult to measure. The simulations evaluated both the 65 nm IDA metal-1 M1 trench and the polysilicon stack and more recent 13 nm linewidth logic cells.

Citation Download Citation

Richard M. Silver, Bryan M. Barnes, Yeungjoon Sohn, Richard Quintanilha, Hui Zhou, Chris Deeb, Mark Johnson, Milton Goodwin, and Dilip Patel "The limits and extensibility of optical patterned defect inspection", Proc. SPIE 7638, Metrology, Inspection, and Process Control for Microlithography XXIV, 76380J (1 April 2010); https://doi.org/10.1117/12.850935

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE