6 October 2016 Fabrication and analysis of radiofrequency MEMS series capacitive single-pole double-throw switch
Deepak Bansal, Anuroop Bajpai, Prem Kumar, Maninder Kaur, Kamaljit Rangra
Author Affiliations +
Abstract
A compact radiofrequency (RF) MEMS single-pole double-throw (SPDT) switch based on series capacitive configuration is proposed. The critical process parameters are analyzed to improve the fabrication process. A technique of cold–hot thermal shock for lift-off method is explored. The residual stress in the structure is quantified by lancet test structures that come out to be 51 MPa. Effect of residual stress on actuation voltage is explored, which changes its value from 24 to 22 V. Resonance frequency and switching speed of the switch are 11 kHz and 44  μs, respectively, measured using laser Doppler vibrometer. Measured bandwidth of the SPDT switch is 20 GHz (5 to 25 GHz), which is verified with finite element method simulations in high frequency structure simulator© and an equivalent LCR circuit in advanced design system©. Insertion loss of the switch lies in −0.1 to −0.5  dB with isolation better than −20  dB for the above-mentioned bandwidth.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 1932-5150/2016/$25.00 © 2016 SPIE
Deepak Bansal, Anuroop Bajpai, Prem Kumar, Maninder Kaur, and Kamaljit Rangra "Fabrication and analysis of radiofrequency MEMS series capacitive single-pole double-throw switch," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(4), 045001 (6 October 2016). https://doi.org/10.1117/1.JMM.15.4.045001
Published: 6 October 2016
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Single point diamond turning

Microelectromechanical systems

Gold

Finite element methods

Photoresist materials

Capacitance

RELATED CONTENT

RF MEMS devices for communication systems
Proceedings of SPIE (February 16 2004)
MEMS post-processing of MPW dies using BSOI carrier wafers
Proceedings of SPIE (February 26 2008)
A novel suspended gate MOSFET pressure sensor
Proceedings of SPIE (July 01 2005)

Back to Top