26 May 2014 Performance of hetero junction with intrinsic thin-layer solar cell depending upon contact resistivity of front electrode
Youngseok Lee, Sangmyeong Han, Sunbo Kim, Sk Md Iftiquar, Youn-Jung Lee, Jinsu Yoo, Vinh Ai Dao, Junsin Yi
Author Affiliations +
Abstract
Low temperature curing of Ag paste for electrode formation in silicon hetero junction (SHJ) solar cells is important for providing better device characteristics. Ag paste is composed of solvent, various organic materials, and additives; hence its electrical and mechanical adhesion properties depend on the curing conditions. The adhesion of the Ag paste was determined by scratch test, whereas the specific contact resistance was measured using the transfer length method. Various Ag electrodes were formed at various curing temperatures within the temperature range of 160°C–240°C, at 20°C intervals. The curing time was also varied for another set of Ag electrodes. With 200°C temperature and for 20-min curing, the critical load of 20.06 N and specific contact resistance of 19.61  mΩcm 2 were observed. Using the same conditions, the efficiency of the SHJ solar cell was found to be improved by 3.8%.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Youngseok Lee, Sangmyeong Han, Sunbo Kim, Sk Md Iftiquar, Youn-Jung Lee, Jinsu Yoo, Vinh Ai Dao, and Junsin Yi "Performance of hetero junction with intrinsic thin-layer solar cell depending upon contact resistivity of front electrode," Journal of Photonics for Energy 4(1), 043094 (26 May 2014). https://doi.org/10.1117/1.JPE.4.043094
Published: 26 May 2014
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Silver

Electrodes

Resistance

Temperature metrology

Silicon

Crystals

RELATED CONTENT

Carrier lifetime of black silicon as a photoconductor
Proceedings of SPIE (March 02 2020)
Alkaline fuel cell with nitride membrane
Proceedings of SPIE (June 02 2017)

Back to Top