In this study, we investigate the hierarchical microarchitecture formation of magnetic barium hexaferrite (BF) platelets in polydimethylsiloxane (PDMS) using electric and magnetic field assembly technique. First, external fields are applied to the colloidal solution to form the microstructure before curing the composites. After microstructure formation, the composites are thermally cured to freeze the microstructure. We investigate two different cases in this study-(1) magnetic field processed composites and (2) multi-field processed composites, which were processed under both magnetic and electric fields. We observe that macro-chains formed due to simultaneous application of electric and magnetic fields had a much higher length compared to the macro-chains formed due to just magnetic field. For both cases individual BHFs are found to be oriented in the direction of the external field. The analysis of SEM microstructures using ImageJ and MATLAB showed that at least two different levels of hierarchies are present in the microstructure for both cases, which are referred to as BHF stacks and micro-chains. From the experimental quantitative microstructure analysis, BHFs are found to be slightly better oriented (magnetic easy-axis direction in relation to the external field) at all scales for the electric and magnetic field processed composites compared to just the magnetic field processed composites. Magneto-electrohydrodynamics modeling of the polymer-particulate mixture predicts a similar behavior. Computational simulations are performed wherein particulates, subjected to both DEP forces resulting from an applied electric field, and magnetic dipole interactions in response to applied magnetic field, are allowed to form quasi-equilibrium structures before locking in a final structure to represent curing. Results from simulation confirms the finding on longer macro-chain formation similar to the experiment for the case of magnetic and electric fields compared to just magnetic field. Analysis of the microstructures from simulation also confirms that multiple levels of hierarchies are present in the composites’ microstructure for both cases. In future, quantifying the corresponding metrics at each level of hierarchy will help to better understand the microstructure and can be served as input to the model and also used to validate the model.
Electroactive polymer (EAPs)-based technologies have shown promise in areas such as artificial muscles, aerospace, medical devices and soft robotics because of large electromechanical actuation at relatively high speed. The promises of EAPs have led us to study EAP-based grippers. The in-plane actuation of P(VDF-TrFE-CTFE) is converted into bending actuation using unimorph configurations, where one passive substrate layer is attached to the active polymer. On-demand segmented folding is harnessed from this pure bending actuation by creating notch samples with an aim to implement them for applications like soft robotics gripper. In this paper, we studied the effect of various design parameters of notched folding actuators to establish a design reference and maximize the actuation performance of EAP based devices. Both finite element analysis (FEA) and micromechanics based analytical study is performed to investigate the effect of actuator parameters on the folding actuation of notched samples. The notched configuration has been analyzed via FEA for the non-uniform deformations and stress-fields. FEA analysis shows the importance of notch positioning to maximize the electromechanical performance. On the other hand, analytical study has proposed a design curve for the selection of proper notch parameters (e.g. notch length and Young’s Modulus) to maximize the actuation performance. Finally, based on the FEA and analytical analysis, a human finger inspired ‘finger-like’ biomimetic actuator is realized by assigning multiple notches to the structure.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.