We present the photometric performance of SPIRIT, a ground-based near-infrared InGaAs CMOS-based instrument (1280 by 1024 pixels, 12 μm pitch), using on-sky results from the SPECULOOS-Southern Observatory during 2022 – 2023. SPIRIT was specifically designed to optimise time-series photometric precision for observing late M and L type stars. To achieve this, a custom wide-pass filter (0.81 – 1.33 μm, zYJ ) was used, which was also designed to minimise the effects of atmospheric precipitable water vapour (PWV) variability on differential photometry. Additionally, SPIRIT was designed to be maintenance-free by eliminating the need for liquid nitrogen for cooling. We compared SPIRIT’s performance with a deeply-depleted (2048 by 2048 pixels, 13.5 μm pitch) CCD-based instrument (using an I+z’ filter, 0.7 – 1.1 μm) through simultaneous observations. For L type stars and cooler, SPIRIT exhibited better photometric noise performance compared to the CCD-based instrument. The custom filter also significantly minimised red noise in the observed light curves typically introduced by atmospheric PWV variability. In SPIRIT observations, the detector’s read noise was the dominant limitation, although in some cases, we were limited by the lack of comparison stars.
On December 2021, a new camera box for two-colour simultaneous visible photometry was successfully installed on the ASTEP telescope at the Concordia station in Antarctica. The new focal box offers increased capabilities for the ASTEP+ project. The opto-mechanical design of the camera was described in a previous paper.1 Here, we focus on the laboratory tests of each of the two cameras, the low-temperature behaviour of the focal box in a thermal chamber, the on-site installation and alignment of the new focal box on the telescope, the measurement of the turbulence in the tube and the operation of the telescope equipped with the new focal box. We also describe the data acquisition and the telescope guiding procedure and provide a first assessment of the performances reached during the first part of the 2022 observation campaign. Observations of the WASP19 field, already observed previously with ASTEP, demonstrates an improvement of the SNR by a factor 1.7, coherent with an increased number of photon by a factor of 3. The throughput of the two cameras is assessed both by calculation of the characteristics of the optics and quantum efficiency of the cameras, and by direct observations on the sky. We find that the ASTEP+ two-colour transmission curves (with a dichroic separating the fluxes at 690nm) are similar to those of GAIA in the blue and red channels, but with a lower transmission in the ASTEP+ red channel leading to a 1.5 magnitude higher B-R value compared to the GAIA B-R value. With this new setting, the ASTEP+ telescope will ensure the follow-up and the characterization of a large number of exoplanetary transits in the coming years in view of the future space missions JWST and Ariel.
The possibility to observe transiting exoplanets from Dome C in Antarctica provides immense benefits: stable weather conditions, limited atmospheric turbulence, and a night that lasts almost three months due to the austral winter. However, this site also presents significant limitations, such as limited access for maintenance and internet speeds of only a few KB/s. This latter factor means that the approximately 6 TB of data collected annually must be processed on site automatically, with only final data products being sent once a day to Europe. In this context, we present the current state of operations of ASTEP+, a 40 cm optical telescope located at Concordia Station in Antarctica. Following a successful summer campaign, ASTEP+ has begun the 2022 observing season with a brand-new two-color photometer with increased sensitivity. A new Python data analysis pipeline installed on a dedicated server in Concordia will significantly improve the precision of the extracted photometry, enabling us to get higher signal-to-noise transit detections. The new pipeline additionally incorporates automatic transit modelling to reduce the amount of manual post-processing required. It also handles the automatic daily transfer of the photometric light curves and control data to Europe. Additionally, we present the Python and web-based systems used for selection and scheduling of transit observations; these systems have wide applicability for the scheduling of other astronomical observations with strong time constraints. We also review the type of science that ASTEP+ will be conducting and analyze how unique ASTEP+ is to exoplanet transit research.
SPECULOOS (Search for habitable Planets EClipsing ULtra-cOOl Stars) aims to perform a transit search on the nearest (< 40 pc) ultracool (< 3000K) dwarf stars. The project's main motivation is to discover potentially habitable planets well-suited for detailed atmospheric characterisation with upcoming giant telescopes, like the James Webb Space Telescope (JWST) and European Large Telescope (ELT). The project is based on a network of 1m robotic telescopes, namely the four ones of the SPECULOOS-Southern Observatory (SSO) in Cerro Paranal, Chile, one telescope of the SPECULOOS-Northern Observatory (SNO) in Tenerife, and the SAINTEx telescope in San Pedro Martir, Mexico. The prototype survey of the SPECULOOS project on the 60 cm TRAPPIST telescope (Chile) discovered the TRAPPIST-1 system, composed of seven temperate Earth-sized planets orbiting a nearby (12 pc) Jupiter-sized star. In this paper, we review the current status of SPECULOOS, its first results, the plans for its development, and its connection to the Transiting Exoplanet Survey Satellite (TESS) and JWST.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.