In this multi-messenger astronomy era, all the observational probes are improving their sensitivities and overall performance. The Focusing on Relativistic universe and Cosmic Evolution (FORCE) mission, the product of a JAXA/NASA collaboration, will reach a 10 times higher sensitivity in the hard X-ray band (E > 10 keV) in comparison with any previous hard x-ray missions, and provide simultaneous soft x-ray coverage. FORCE aims to be launched in the early 2030s, providing a perfect hard x-ray complement to the ESA flagship mission Athena. FORCE will be the most powerful x-ray probe for discovering obscured/hidden black holes and studying high energy particle acceleration in our Universe and will address how relativistic processes in the universe are realized and how these affect cosmic evolution. FORCE, which will operate over 1–79 keV, is equipped with two identical pairs of supermirrors and wideband x-ray imagers. The mirror and imager are connected by a high mechanical stiffness extensible optical bench with alignment monitor systems with a focal length of 12 m. A light-weight silicon mirror with multi-layer coating realizes a high angular resolution of < 15′′ in half-power diameter in the broad bandpass. The imager is a hybrid of a brand-new SOI-CMOS silicon-pixel detector and a CdTe detector responsible for the softer and harder energy bands, respectively. FORCE will play an essential role in the multi-messenger astronomy in the 2030s with its broadband x-ray sensitivity.
Xtend is a soft x-ray imaging telescope developed for the x-ray imaging and spectroscopy mission (XRISM). XRISM is scheduled to be launched in the Japanese fiscal year 2022. Xtend consists of the soft x-ray imager (SXI), an x-ray CCD camera, and the x-ray mirror assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. The SXI uses the P-channel, back-illuminated type CCD with an imaging area size of 31mm on a side. The four CCD chips are arranged in a 2×2 grid and can be cooled down to −120 °C with a single-stage Stirling cooler. The XMA nests thin aluminum foils coated with gold in a confocal way with an outer diameter of 45 cm. A pre-collimator is installed in front of the x-ray mirror for the reduction of the stray light. Combining the SXI and XMA with a focal length of 5.6m, a field of view of 38′ × 38′ over the energy range from 0.4 to 13 keV is realized. We have completed the fabrication of the flight model of both SXI and XMA. The performance verification has been successfully conducted in a series of sub-system level tests. We also carried out on-ground calibration measurements and the data analysis is ongoing.
We have been developing monolithic active pixel sensors, X-ray SOIPIXs based on a Silicon-On-Insulator CMOS technology. Its event trigger output function offers a high time resolution better than ~10 usec. (1) We report the device structure optimized to achieve both low noise, a thick depletion layer, and to non-punch-through. (2) We succeeded in achieving an energy resolution of ~300 eV (FWHM) at 6 keV with a depletion layer of 300 um at room temperature by operating frequent reset to reduce the shot noise. (3) We present the development of "Digital X-ray SOIPIXs" having on-chip ADCs, DACs and readout sequencers.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.