GEO-X (GEOspace X-ray imager) is a small satellite mission to visualize the Earth’s magnetosphere through Solar Wind Charge eXchange (SWCX). SWCX is known as soft X-ray emissions generated by the charge exchange between highly charged-state heavy ions and neutral atoms in the Earth’s exosphere. The GEO-X satellite is aimed to be launched during the upcoming solar maximum around 2025-2027 and is planned to be injected to a low-latitude orbit which allows visualization of the magnetosphere from outside the magnetosphere. The satellite will carry a light-weight X-ray imaging spectrometer, dramatically improving the size and weight of those onboard past X-ray astronomy satellites.
GEOspace X-ray imager (GEO-X) is a small satellite mission aiming at visualization of the Earth’s magnetosphere by X-rays and revealing dynamic couplings between solar wind and the magnetosphere. In-situ spacecraft have revealed various phenomena in the magnetosphere. X-ray astronomy satellite observations recently discovered soft X-ray emissions originating from the magnetosphere. We are developing GEO-X by integrating innovative technologies of a wide field of view (FOV) X-ray instrument and a small satellite for deep space exploration. The satellite combines a Cubesat and a hybrid kick motor, which can produce a large delta v to increase the altitude of the orbit to about 30 to 60 RE from a relatively low-altitude (e.g., geo transfer orbit) piggyback launch. GEO-X carries a wide FOV (5 × 5 deg) and a good spatial resolution (10 arcmin) X-ray (0.3 to 2 keV) imaging spectrometer using a micro-machined X-ray telescope and a CMOS detector system combined with an optical blocking filter. We aim to launch the satellite around the solar maximum of solar cycle 25.
GEO-X (GEOspace X-ray imager) is a small satellite mission aiming at visualization of the Earth’s magnetosphere by X-rays and revealing dynamical couplings between solar wind and magnetosphere. In-situ spacecraft have revealed various phenomena in the magnetosphere. In recent years, X-ray astronomy satellite observations discovered soft X-ray emission originated from the magnetosphere. We therefore develop GEO-X by integrating innovative technologies of the wide FOV X-ray instrument and the microsatellite technology for deep space exploration. GEO-X is a 50 kg class microsatellite carrying a novel compact X-ray imaging spectrometer payload. The microsatellite having a large delta v (<700 m/s) to increase an altitude at 40-60 RE from relatively lowaltitude (e.g., Geo Transfer Orbit) piggyback launch is necessary. We thus combine a 18U Cubesat with the hybrid kick motor composed of liquid N2O and polyethylene. We also develop a wide FOV (5×5 deg) and a good spatial resolution (10 arcmin) X-ray (0.3-2 keV) imager. We utilize a micromachined X-ray telescope, and a CMOS detector system with an optical blocking filter. We aim to launch the satellite around the 25th solar maximum.
GEO-X (GEOspace X-ray imager) is a 50 kg-class small satellite to image the global Earth’s magnetosphere in X-rays via solar wind charge exchange emission. A 12U CubeSat will be injected into an elliptical orbit with an apogee distance of ∼40 Earth radii. In order to observe the diffuse soft X-ray emission in 0.3-2 keV and to verify X-ray imaging of the dayside structures of the magnetosphere such as cusps, magnetosheaths and magnetopauses which are identified statistically by in-situ satellite observations, an original light-weight X-ray imaging spectrometer (∼10 kg, ∼10 W, ∼10×10×30 cm) will be carried. The payload is composed of a ultra light-weight MEMS Wolter type-I telescope (∼4×4 deg2 FOV, <10 arcmin resolution) and a high speed CMOS sensor with a thin optical blocking filter (∼2×2 cm2 , frame rate ∼20 ms, energy resolution <80 eV FWHM at 0.6 keV). An aimed launch year is 2023-25 corresponding to the 25th solar maximum.
Toward an era of x-ray astronomy, next-generation x-ray optics are indispensable. To meet a demand for telescopes lighter than the foil optics but with a better angular resolution <1 arcmin, we are developing micropore x-ray optics based on micromaching technologies. Using sidewalls of micropores through a thin silicon wafer, this type can be the lightest x-ray telescope ever achieved. Two Japanese missions, ORBIS and GEO-X, will carry this telescope. ORBIS is a small x-ray astronomy mission to monitor supermassive blackholes, while GEO-X is a small exploration mission of the Earth’s magnetosphere. Both missions need an ultralightweight (<1 kg) telescope with moderately good angular resolution (<10 arcmin) at an extremely short focal length (<30 cm). We plan to demonstrate this type of telescope in these two missions around 2020.
Toward a new era of X-ray astronomy, next generation X-ray optics are indispensable. To meet a demand for telescopes lighter than the foil optics but with a better angular resolution less than 1 arcmin, we are developing micropore X-ray optics based on micromaching technologies. Using sidewalls of micropores through a thin silicon wafer, this type can be the lightest X-ray telescope ever achieved. Two new Japanese missions ORBIS and GEOX will carry this optics. ORBIS is a small X-ray astronomy mission to monitor supermassive blackholes, while GEO-X is a small exploration mission of the Earth’s magnetosphere. Both missions need a ultra light-weight (<1 kg) telescope with moderately good angular resolution (<10 arcmin) at an extremely short focal length (<30 cm). We plan to demonstrate this optics in these two missions around 2020, aiming at future other astronomy and exploration missions.
We describe the development of the focal plane detector onboard a micro-satellite aimed for observing cosmic Xray emission. Combined with an X-ray optics with focal length of approximately 40 mm, an X-ray CCD camera realizes low and stable background thanks to its capability of event classification by pulse height distribution of a event. The mission will intensively monitor a specific binary black hole to investigate periodic time variability owing to its possible binary motion. The focal plane detector adopts P-channel back-illumination type CCD. It is a miniature version of the sensors utilized in the CCD camera aboard Hitomi satellite but is upgraded in terms of the energy resolution and the prevention of visible light transmittance. We have built up an equipment for cooling and driving the device. Dark current as a function of device temperature is investigated. We see clear difference of the amount of the dark current between the imaging area and frame store area, which is probably due to the difference of the pixel size. The result indicates sufficiently low dark current can be achieved with temperature lower or equal to -80 °C. Number of pinholes in a surface aluminium layer is significantly different between devices. We identified a process with which we decrease the number of pinholes. To realize a whole instrument, we develop communication board and compact analog board.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.