Amanda Tiano, Cheol Park, Joseph Lee, Hoa Luong, Luke Gibbons, Sang-Hyon Chu, Samantha Applin, Peter Gnoffo, Sharon Lowther, Hyun Jung Kim, Paul Danehy, Jennifer Inman, Stephen Jones, Jin Ho Kang, Godfrey Sauti, Sheila Thibeault, Vesselin Yamakov, Kristopher Wise, Ji Su, Catharine Fay
Scientists have predicted that carbon’s immediate neighbors on the periodic chart, boron and nitrogen, may also form perfect nanotubes, since the advent of carbon nanotubes (CNTs) in 1991. First proposed then synthesized by researchers at UC Berkeley in the mid 1990’s, the boron nitride nanotube (BNNT) has proven very difficult to make until now. Herein we provide an update on a catalyst-free method for synthesizing highly crystalline, small diameter BNNTs with a high aspect ratio using a high power laser under a high pressure and high temperature environment first discovered jointly by NASA/NIA/JSA. Progress in purification methods, dispersion studies, BNNT mat and composite formation, and modeling and diagnostics will also be presented. The white BNNTs offer extraordinary properties including neutron radiation shielding, piezoelectricity, thermal oxidative stability (> 800°C in air), mechanical strength, and toughness. The characteristics of the novel BNNTs and BNNT polymer composites and their potential applications are discussed.
Jin Ho Kang, Iseley Marshall, Mattew Torrico, Chase Taylor, Jeffry Ely, Angel Henderson, Godfrey Sauti, Luke Gibbons, Jae-Woo Kim, Cheol Park, Sharon Lowther, Peter Lillehei, Robert Bryant
Tailoring the solar absorptivity (αs) and thermal emissivity (ƐT) of materials constitutes an innovative approach to solar energy control and energy conversion. Numerous ceramic and metallic materials are currently available for solar absorbance/thermal emittance control. However, conventional metal oxides and dielectric/metal/dielectric multi-coatings have limited utility due to residual shear stresses resulting from the different coefficient of thermal expansion of the layered materials. This research presents an alternate approach based on nanoparticle-filled polymers to afford mechanically durable solar-absorptive and thermally-emissive polymer nanocomposites. The αs and ƐT were measured with various nano inclusions, such as carbon nanophase particles (CNPs), at different concentrations. Research has shown that adding only 5 wt% CNPs increased the αs and T by a factor of about 47 and 2, respectively, compared to the pristine polymer. The effect of solar irradiation control of the nanocomposite on solar energy conversion was studied. The solar irradiation control coatings increased the power generation of solar thermoelectric cells by more than 380% compared to that of a control power cell without solar irradiation control coatings.
A carbon nanocomposite-based contact mode interdigitated center of pressure sensor (CMIPS) has been developed.
The experimental study demonstrated that the CMIPS has the capability to measure the overall pressure as well as
the center of pressure in one dimension, simultaneously. A theoretical model for the CMIPS is established here
based on the equivalent circuit of the CMIPS configuration as well as the material properties of the sensor. The
experimental results match well with the theoretical modeling predictions. This theoretical model will provide
guidelines for future advanced sensor development based on the CMIPS. A system mapped with two or more pieces
of the CMIPS can be used to obtain information from the pressure distribution in multi-dimensions. As an
intelligent system component, the inexpensive CMIPS can be used broadly for improving sensing and control
capabilities of aircraft and measurement capabilities of biomedical research as well as chemical industries.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.