The TeraByte InfraRed Delivery (TBIRD) system is a 3U payload on a 6U CubeSat launched in May 2022 which has now demonstrated space to ground links of >1 Terabyte (TB) per pass at a max data rate of 200Gbps. As a CubeSat mission, the development of the TBIRD payload was focused on low SWaP and a “rapid prototyping” approach which accepted higher risks to accelerate the schedule and reduce costs. The optomechanical design process followed standard in-house processes to develop a system that would be robust to LEO environmental loads, with a focus on the stability of the transmit (Tx) and receive (Rx) channel performance metrics. The driving requirement of maintaining 20μrad pointing error between the TX and Rx channels forced specific attention to thermal and mechanical load changes over operational conditions, which drove major design decisions. This paper describes some of engineering challenges overcome and approaches used to make TBIRD a successful program, as well as some of the tradeoffs of rapid prototyping precision optical payloads. TBIRD successfully met and exceeded the total downlink requirements listed above, with a bandwidth of 200Gbps and a total downlink of 4.8TB of information in a single pass.
KEYWORDS: Laser communications, Laser communication terminals, Design, Telecommunications, Data communications, Laser systems engineering, Optical communications, Adaptive optics, Space operations, Satellites
The Black Hole Explorer (BHEX) is a mission concept that can dramatically improve state-of-the-art astronomical very long baseline interferometry (VLBI) imaging resolution by extending baseline distances to space. To support these scientific goals, a high data rate downlink is required from space to ground. Laser communications is a promising option for realizing these high data rate, long-distance space-to-ground downlinks with smaller space/ground apertures. Here, we present a scalable laser communications downlink design and current lasercom mission results.
Since launch in May 2022, the TeraByte Infrared Delivery (TBIRD) payload on a 6U CubeSat has successfully demonstrated 100/200 Gbps laser communications and has transferred >1 TB in a pass from low Earth orbit to ground. To support the narrow downlink beam needed for high rate communications, the payload provides pointing feedback to the host spacecraft to precisely track the ground station throughout the 5-minute pass. This paper presents the on-orbit results of the pointing and tracking system for TBIRD, including initial acquisition and closed-loop tracking performance of 20-35 μrad RMS per axis. Results from on-orbit characterization of the transmit beam are also presented. Measurements of Tx/Rx alignment show stability within 20 μrad, ensuring that tracking on the uplink accurately points the downlink.
Since launch in May 2022, NASA's TeraByte Infrared Delivery (TBIRD) program has successfully demonstrated 100-Gbps and 200-Gbps laser communication downlinks from a 6U CubeSat in low-Earth orbit to a ground station. The TBIRD system operates during 5-minute passes over the ground station and has demonstrated an error-free downlink transfer of > 1 Terabyte (TB) in a single pass. This paper presents an overview of the architecture, link operations, and system performance results to date.
The Terabyte InfraRed Delivery (TBIRD) program will establish a communication link from a nanosatellite in low-Earth orbit to a ground station at burst rates up to 200 Gbps. The TBIRD payload is currently in the process of integrating with the 6-U CubeSat host bus and pre-flight testing has been completed. An overview of the pointing, acquisition, and tracking system for TBIRD is provided as well as a summary of results from pre-flight testing. TBIRD relies on the spacecraft bus to implement fine pointing corrections supplied by its quad sensor at a rate of 10 Hz. The measured accuracy of pointing feedback is about 10 μrad RMS per axis. A custom optical assembly was designed for transmitter/receiver alignment stability which was measured to be within 25 μrad two-axis through environmental testing. With TBIRD feedback in the loop, single axis pointing accuracy of the downlink is predicted to be about 30 μrad RMS.
The Terabyte Infrared Delivery (TBIRD) program will establish an optical communication link from a 6U nanosatellite in low-Earth orbit to a ground station at burst rates up to 200 Gbps. The system is capable of reliable data delivery from a 2-TB storage buffer on the payload to a ground terminal in the presence of atmospheric fading. An overview of the communication architecture for TBIRD is provided as well as results from communications performance testing of the 3U lasercom payload prior to spacecraft integration. Launch is scheduled for mid-year 2022.
Free-space optical communications in space offer many benefits over established radio frequency based communication links; in particular, high beam directivity results in efficient power usage. Such a reduced power requirement is particularly appealing to small satellites with strict size, weight and power (SWaP) requirements. In the case of free-space optical communication, precise pointing, acquisition and tracking (PAT) of the incoming beam is necessary to close the communication link. Due to the narrow beam of the laser, the critical task of accomplishing PAT becomes increasingly arduous and often requires complex systems of optical and processing hardware to account for relative movement of the terminals. Recent developments in body pointing mecha- nisms have allowed small satellites to point with greater precision. In this work, we consider an approach to a low-complexity PAT system that utilizes a single quad-cell photodetector as an optical spatial sensor, and exploits the body pointing capabilities of the spacecraft to perform the tracking maneuvers, eschewing the need for additional dedicated optical hardware. We look at the PAT performance of this approach from a systems analysis viewpoint and present preliminary experimental results. In particular, we examine the implementation of the system on NASA's TeraByte InfraRed Delivery (TBIRD) demonstration.
A telescope control system relies on a pointing model to determine the gimbal angles that aim the telescope toward a desired target. High-accuracy telescope pointing models include parameters that describe the mount/telescope orientation as well as common mechanical effects. For professional telescopes, calibrating the pointing model requires careful initial alignment around a nominal orientation (e.g., leveling) followed by sightings of dozens to hundreds of stars to fit the model parameters. While this approach is effective for observatories, applications such as transportable optical ground stations for communications, space situational awareness, or astronomy using low-cost telescope networks can benefit from a more rapid calibration approach. We formulate a quaternion-based pointing model that utilizes measurements from an externally mounted star camera to compromise between calibration speed and accuracy. A key aspect of this formulation is that it is completely agnostic to the orientation of the telescope/mount so that no manual prealignment is required. We derive angle and rate commands for telescope pointing and tracking based on the model. We present results from a 15-min calibration procedure on a very low-cost telescope that demonstrated pointing to an accuracy of 53 arc sec RMS in azimuth and 66 arc sec RMS between 20-deg and 70-deg altitude.
KEYWORDS: Mirrors, Microelectromechanical systems, Staring arrays, Data modeling, Astronomical imaging, Control systems, Manufacturing, Optical communications, Laser systems engineering, Temperature metrology
We describe the design of a compact free-space optical communications module for use on a nanosatellite and present results from a detailed trade study to select an optical fine steering mechanism compatible with our stringent size, weight and power (SWaP) constraints. This mechanism is an integral component of the compact free-space optical communications system that is under development at the MIT Space Systems Laboratory [1]. The overall goal of this project is to develop a laser communications (lasercom) payload that fits within the SWaP constraints of a typical “3U” CubeSat. The SWaP constraints for the entire lasercom payload are 5 cm × 10 cm × 10 cm, 600 g and 10W. Although other efforts are underway to qualify MEMS deformable mirrors for use in CubeSats [2], there has been very little work towards qualifying tip-tilt MEMS mirrors [3].
Sec. II provides additional information on how the fast steering mechanism is used in our lasercom system. Performance requirements and desirable traits of the mechanism are given. In Sec. III we describe the various types of compact tip-tilt mirrors that are commercially available as well as the justification for selecting a MEMS-based device for our application. Sec. IV presents an analysis of the device's transfer function characteristics and ways of predicting this behavior that are suitable for use in the control processor. This analysis is based upon manufacturer-provided test data which was collected at standard room conditions. In the final section, we describe on-going work to build a testbed that will be used to measure device performance in a thermal chamber.
The nanosatellite optical downlink experiment (NODE) implements a free-space optical communications (lasercom) capability on a CubeSat platform that can support low earth orbit (LEO) to ground downlink rates>10 Mbps. A primary goal of NODE is to leverage commercially available technologies to provide a scalable and cost-effective alternative to radio-frequency-based communications. The NODE transmitter uses a 200-mW 1550-nm master-oscillator power-amplifier design using power-efficient M-ary pulse position modulation. To facilitate pointing the 0.12-deg downlink beam, NODE augments spacecraft body pointing with a microelectromechanical fast steering mirror (FSM) and uses an 850-nm uplink beacon to an onboard CCD camera. The 30-cm aperture ground telescope uses an infrared camera and FSM for tracking to an avalanche photodiode detector-based receiver. Here, we describe our approach to transition prototype transmitter and receiver designs to a full end-to-end CubeSat-scale system. This includes link budget refinement, drive electronics miniaturization, packaging reduction, improvements to pointing and attitude estimation, implementation of modulation, coding, and interleaving, and ground station receiver design. We capture trades and technology development needs and outline plans for integrated system ground testing.
Miniaturized satellites such as CubeSats continue to improve their capabilities to enable missions that can produce significant amounts of data. For most CubeSat missions, data must be downlinked during short low-earth orbit ground station passes, a task currently performed using traditional radio systems. Free-space optical communications take advantage of the high gain of a narrow optical beam to achieve better link efficiency, allowing more valuable data to be downlinked over the mission lifetime. We present the Nanosatellite Optical Downlink Experiment (NODE) design, capable of providing a typical 3U (30 x 10 x 10 cm) CubeSat with a comparatively high data-rate downlink. The NODE optical communication module is designed to fit within a 5 x 10 x 10 cm volume, weigh less than 1 kg, and consume no more than 10Wof power during active communication periods. Our design incorporates a fine-steering mechanism and beacon-tracking system to achieve a 10 Mbps link rate. We describe the system-level requirements and designs for key components, including a transmitter, a beacon tracking camera, and a fast-steering mirror. We present simulation results of the uplink beacon tracking and fine steering of the downlink beam, including the effects of atmospheric fading and on-orbit environmental disturbances to demonstrate the feasibility of this approach.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.