Mr. Rémi Ammann Profile

Rémi Ammann

SPIE Involvement:

Author

Publications (2)

SPIE Journal Paper | 16 June 2022 Open Access

Three-dimensional analysis of aligner gaps and thickness distributions, using hard x-ray tomography with micrometer resolution

Rémi Ammann, Christine Tanner, Georg Schulz, Bekim Osmani, Prasad Nalabothu, Tino Töpper, Bert Müller

JMI, Vol. 9, Issue 03, 031509, (June 2022) https://doi.org/10.1117/12.10.1117/1.JMI.9.3.031509

KEYWORDS: Teeth, 3D modeling, Tomography, Temperature metrology, Image segmentation, Polymers, Data modeling, Transmittance, Hard x-rays, Bone

Read Abstract +

Purpose: The morphology of a polymer aligner, designed according to an orthodontic treatment plan, determines clinical outcomes. A fundamental element of orthodontic tooth movement with aligner treatment is the fit of the aligner’s surface to the individual teeth. Gaps between the aligner and teeth do occur because current aligner fabrication is not capable of completely reproducing the complex anatomy of the individual denture. Our study aims at a quantitative three-dimensional assessment of the fit between optically transparent aligners placed on a polymeric model of the upper dental arch for two thermofoil thicknesses at preselected thermoforming temperatures. Approach: Using an intraoral scan of a subject’s upper dental arch, eight models were printed using a stereolithographic system. A series of eight NaturAligners® was manufactured with a pressure molding process, using thermofoils with thicknesses of 550 and 750 μm and preselected process temperatures between 110°C and 210°C. These aligners placed on the corresponding models were imaged by an advanced micro computed tomography system. The aligners and the models were segmented to extract the gaps and aligners’ local thicknesses as a function of the processing temperature for the two foil thicknesses. Results: The results indicate that the aligners show a better fit when the foils are processed at higher temperatures. Nevertheless, processing temperatures can be kept below 150°C, as the gain becomes negligible. Thermal processing reduces the average thickness of the aligners to 60% with respect to the planar starting foil. These thickness distributions demonstrate that the aligners are generally thicker on the occlusal surfaces of molars and premolars but thinner around the incisors and buccal as well as on oral surfaces. Conclusions: Hard x-ray tomography with micrometer resolution is a powerful technique employed to localize the gaps between aligners and teeth, and it also enables film thickness measurements after thermoforming. The thicker film on the occlusal surfaces is most welcome because of aligner abrasion during wear. The NaturAligner® surfaces consist of a 25-μm-thin cellulose layer, and thus the microplastics released via abrasion of less than this thickness are expected to be substantially less critical than for other commercially available, optically transparent aligners.

DOWNLOAD PAPER

Proceedings Article | 12 October 2021 Presentation + Paper

Three-dimensional analysis of aligner gaps and thickness distributions using advanced laboratory-based hard x-ray tomography

Remi Ammann, Christine Tanner, Georg Schulz, Bekim Osmani, Prasad Nalabothu, Tino Töpper, Bert Müller

Proceedings Volume 11840, 1184008 (2021) https://doi.org/10.1117/12.2592821

KEYWORDS: Teeth, 3D modeling, Temperature metrology, Tomography, Data modeling, Bone, Polymers, Image segmentation, Hard x-rays, Optical properties

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years