In prior research, Jamali et al. demonstrated the efficacy of a 20-mm aperture liquid crystal (LC) tunable lens for both accommodation-convergence mismatch correction and presbyopia correction. This lens employed a concentric ring electrode-based LC design with a segmented phase profile, enabling a larger aperture size without affecting switching speed. However, for near-eye application, a high optical quality LC lens with larger than 20-mm aperture size is a requirement to allow large field of view. Therefore, we report here a 50-mm aperture LC lens with incorporated solutions to minimize haze that results due to the large aperture size. Due to its large aperture size, fast switching speed, compact size, and low voltage operation, the reported 50 mm LC lens is a practical option for near-to-eye applications and other tunable lens applications. The objective of this paper is to provide a comprehensive detail on the design, modeling, fabrication, and characterization of the optical quality of the developed 50 mm LC lens. Quantitative assessments of the lens’s optical quality are presented across the entire aperture, with a particular focus on near-eye applications.
In the field of augmented reality/virtual reality head-mounted displays or eyeglasses, electro-optical tunable lenses have great potential to resolve the issue of accommodation-convergence conflicts and to correct vision problems. A high-quality tunable lens with a large field of view is highly desired for these near-to-eye applications. Recently, gradient refractive index tunable liquid crystal lenses with a concentric ring electrode design and segmented phase profile have received attention due to their compactness, low-voltage requirement, and ability to provide a large aperture size while maintaining a fast-switching speed. However, this design can result in degradation of optical quality, causing haze from the phase reset boundaries and electrode discontinuity. We analyze the cause of haze and presents solutions to reduce these effects, and we experimentally validate them.
An optical imaging system’s image quality can deteriorate due to uncorrected astigmatism and defocus. An approach to correct these issues is proposed, which involves a non-mechanical, electronically adjustable system. This system consists of three liquid crystal-based cylindrical lenses, which adjust optical power depending on applied voltage values. The advantages of this system include a simple and low-cost structure, large aperture size, low-voltage drive, and compact design. This non-mechanical solution has great potential for various applications, such as wavefront correction for large telescopes, microscopy, augmented reality/virtual reality, and prescription eyeglasses. Design, fabrication, and optical characterization of the proposed device are discussed.
Continuous tunable lenses have significant prospect to replace conventional bulky fixed power lens system. However, lightweight, fast response, large aperture (⪆1 cm) tunable lens system remained an active challenge in the field of adaptive optics. While many approaches have been reported so far, very few can be realized for practical application of optics that requires large aperture size tunable lenses. Gradient Refractive Index (GRIN) liquid crystal lenses are one of approach which gives good control over the continuous tunability, however, large aperture device suffers from very low switching speed. In this paper, without compromising the switching speed, we are reporting 5 cm aperture size GRIN liquid crystal based continuous tunable focus lens. Reported approach implements Fresnel lens like parabolic shaped segmented phase profile instead of continuous phase, which is obtained from segmented voltage distribution. The designed lens is flat, fast switching (⪅500 ms), thin (⪅ 2 mm), light weight (⪅ 10 gm), low voltage driven (⪅ 5 V), also tunable continuously between positive to negative power. Such compact system with good optical quality scopes for potential application in eyeglasses to solve presbyopia, accomodation-convergence mismatch issue in emerging head mounted display technology, and many other imaging systems.
There is a need for a tunable lens technology in AR/VR head mounted displays to solve the accommodation-convergence mismatch issue. Liquid crystal lens technology is one of the promising approaches to achieve a simple, low cost and compact design. However, it is challenging to make a lens with a 5 cm aperture with the required variable power range of 0 D to 2.50 D, with an acceptable switching speed. In the device considered here, we use multiple cell design with segmented phase profile to achieve a tunable focus ability with switching speed under 500 ms. To simplify the electronics of the device, inner-ring resistor network have been used between concentric electrodes. Previously, the effect of the electrode gaps has been studied and the improvement with floating electrodes demonstrated for lower power and smaller aperture (2 cm) LC lenses. In this paper, the effect of the fringing electric fields associated with the discrete electrodes are explored through modeling and imaging characterization, and an improved fabrication process are detailed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.