We present a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. This fiber is employed in a CPA setup for coherent beam combination of femtosecond pulses. High average powers of up to 507 W after combination and compression could be achieved at 10 MHz repetition rate. A high combination efficiency of 85% could be realized together with an excellent beam quality. Additionally, up to 600 μJ pulse energy was measured in a lower repetition rate configuration.
Nonlinear effects and transverse mode instabilities (TMI) limit power scaling of single-mode fiber lasers. To overcome these limitations not only the fiber design but also laser relevant properties of the actively doped material itself need to be optimized. By being able to fabricate Yb-doped fibers for high power applications in-house, we have direct access to laser relevant material parameters.We fabricated fibers using three different co-doping systems, namely Yb:Al:P, Yb:Al:F, and Yb:Al:F:Ce. Afterwards we characterized and compared their laser relevant properties. All three co-doping systems showed nearly identical background losses and absorption cross-sections. In contrast, we found that the PD losses and the factor between PD losses @633nm and the laser wavelength range (1μm) to be significantly different. The retrieved characterization results were implemented into our simulations tool in order to improve the reliability of predictions. Finally, we characterized the fibers in kW-amplifier setups according to their power scaling limits, especially the TMI threshold. This cycle of fiber fabrication, characterization, and simulation enabled us to identify the impact of individual fiber parameters on the TMI threshold. We demonstrated that the impact of PD loss leads to a reductions of the TMI threshold for Yb:Al:F co-doping system of 13% to 23% (depending on the Yb-concentration). The PD loss for the two other systems was proved to be significantly lower and was found to have no impact on the TMI threshold. We experimentally proved that your in-house Yb:Al:P and Yb:Al:F:Ce fibers performed like PD-free fibers.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.