We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of ≤100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.
Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales (𝓁 < 30) and improve measurements of the optical depth to reionization (τ). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the ΛCDM model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA’s superpressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100mK transition edge sensor bolometers distributed across two low-frequency (150, 220GHz) and one high-frequency (280, 350GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.
Due to high dynamic range and ease of use, continuous wave terahertz spectroscopy is an increasingly popular method for optical characterization of components used in cosmic microwave background (CMB) experiments. In this work, we describe an optical testbed that enables simultaneous measurements of transmission and reflection properties of various radiation absorbing dielectric materials, essential components in the reduction of undesired optical loading. To demonstrate the performance of the testbed, we have measured the reflection response of five absorbers commonly used for such applications: TKRAM, carbon- and iron-loaded Stycast, HR10, AN72, and an in-house 3D printed absorber across a frequency range of 100 to 500 GHz, for both S- and P-polarization, with incident angles varying from 15° to 45°. We present results on both the specular and scattered reflection response of these absorbers.
Many experimental efforts are striving to provide deep maps of the cosmic microwave background (CMB) to shed light on key questions in modern cosmology. The primary science goal for some of these experiments is to further constrain the energy scale of cosmic inflation. It has been shown that these experiments are particularly sensitive to optical systematics. Near-field vector beam mapping, or holography, is now employed in a variety of CMB-focused experimental efforts due to the technique’s ability to provide full details of electromagnetic field propagation through complex systems. In this proceeding, we describe the development of a measurement bench for millimeter-wave phase-sensitive beam mapping with the goal of characterizing optical components for CMB experiments. We discuss the testing of a beam scanner based on a 6-axis robot arm, the related custom control software, the readout architecture, and the overall validation of the system through various testing procedures. Dynamic range of 70 dB is demonstrated for the presented setup. With the current mechanical setup, we derive an upper limits of 45 μm on the absolute positioning error and 10 μm on positional repeatability.
Current and future experiments observing the cosmic microwave background require a detailed understanding of optical performance at cryogenic temperatures. Pre-deployment analysis of optics can be performed in custom-engineered cryogenic test beds, such as Mod-Cam, a first light camera for the CCAT project. This work presents studies of the mechanical and thermal performance of CryoSim, a model of a generic cylindrical 4-K cryostat cooled with a commercial pulse tube cryocooler that can be used to characterise optical components and full reimaging optical systems. CryoSim is extensively parametrised, allowing the joint analysis and optimisation of mechanical and thermal performance via finite element methods. Results from this model are validated against measured cooldown data of the Mod-Cam cryostat. Due to the extensive parametrisation of the model, significant modifications of the cryostat geometry may be implemented to be representative of any system the scientific community may desire, and validation of thermal and mechanical performance can be carried out rapidly.
Astronomy in the millimetre and sub-millimetre spectrum aims at unveiling the processes behind the origin and evolution of our Universe at various scales, from protostars to the Cosmic Microwave Background. To carry out such observations, novel imaging and spectroscopy instruments covering the Tera-Hertz range are needed. At present, high-resolution spectroscopy is carried out with heterodyne detectors, using either Superconductor-Insulator-Superconductor-mixers or Hot-Electron Bolometer mixers, inherently limited in bandwidth and difficult to multiplex. Imaging is accomplished with detectors working near photo-noise level, primarily Transition Edge Sensors or Microwave Kinetic Inductance Detectors arrays, for which the focal optics needs scaling to reach the sensitivity needed for future cosmology experiments. In this work, the simulated design of a single pixel constituted of a set of antenna-coupled detectors receiving the light focused by a metamaterial-based phase-engineered lenslet is presented. This technology relies on standard lithography fabrication techniques and enables compact and broadband imaging and spectroscopy on-chip.
The next generations of ground-based cosmic microwave background experiments will require polarisation sensitive, multichroic pixels of large focal planes comprising several thousand detectors operating at the photon noise limit. One approach to achieve this goal is to couple light from the telescope to a polarisation sensitive antenna structure connected to a superconducting diplexer network where the desired frequency bands are filtered before being fed to individual ultra-sensitive detectors such as Transition Edge Sensors. Traditionally, arrays constituted of horn antennas, planar phased antennas or anti-reflection coated micro-lenses have been placed in front of planar antenna structures to achieve the gain required to couple efficiently to the telescope optics. In this paper are presented the design concept and a preliminary analysis of the measured performances of a phase-engineered metamaterial flat-lenslet. The flat lens design is inherently matched to free space, avoiding the necessity of an anti-reflection coating layer. It can be fabricated lithographically, making scaling to large format arrays relatively simple. Furthermore, this technology is compatible with the fabrication process required for the production of large-format lumped element kinetic inductance detector arrays which have already demonstrated the required sensitivity along with multiplexing ratios of order 1000 detectors/channel.
The Mexico-UK Sub-millimetre Camera for AsTronomy (MUSCAT) is a large-format, millimetre-wave camera consisting of 1,500 background-limited lumped-element kinetic inductance detectors (LEKIDs) scheduled for deployment on the Large Millimeter Telescope (Volcán Sierra Negra, Mexico) in 2018. MUSCAT is designed for observing at 1.1 mm and will utilise the full 40 field of view of the LMTs upgraded 50-m primary mirror. In its primary role, MUSCAT is designed for high-resolution follow-up surveys of both galactic and extra-galactic sub-mm sources identified by Herschel. MUSCAT is also designed to be a technology demonstrator will provide the first on-sky demonstrations of novel design concepts such as horn-coupled LEKID arrays and closed continuous cycle miniature dilution refrigeration.
Here we describe some of the key design elements of the MUSCAT instrument such as the novel use of continuous sorption refrigerators and a miniature dilutor for continuous 100-mK cooling of the focal plane, broadband optical coupling to Aluminium LEKID arrays using waveguide chokes and anti-reflection coating materials as well as with the general mechanical and optical design of MUSCAT. We will explain how MUSCAT is designed to be simple to upgrade and the possibilities for changing the focal plane unit that allows MUSCAT to act as a demonstrator for other novel technologies such as multi-chroic polarisation sensitive pixels and on-chip spectrometry in the future. Finally, we will report on the current status of MUSCAT's commissioning.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.