In this paper, we investigate several bonding methods for attaching lateral flexures to the side of a mirror in order to mitigate the potential long-term instability caused by thermal stress. To analyze the behavior of the mirror, bonding, and flexures under different mechanical and thermal loads, we utilize finite element models and examine three key aspects of the flexure bonding: the bonding area, the use of an additional block for bonding, and the choice of flexure material. Our study utilizes the primary mirror of the GEMINI telescope as a sample application and for validation purposes. Through our simulations and analysis, we aim to address various options for the flexure-bonding design and optimization.
This conference presentation was prepared for the Ground-based and Airborne Telescopes IX conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
The Giant Magellan Telescope (GMT) will feature two Gregorian secondary mirrors, an adaptive secondary mirror (ASM) and a fast-steering secondary mirror (FSM). The FSM has an effective diameter of 3.2 m and consists of seven 1.1 m diameter circular segments, which are conjugated 1:1 to the seven 8.4m segments of the primary. Each FSM segment contains a tip-tilt capability for fast guiding to attenuate telescope wind shake and mount control jitter. This tiptilt capability thus enhances performance of the telescope in the seeing limited observation mode. The tip-tilt motion of the mirror is produced by three piezo actuators. In this paper we present a simulation model of the tip-tilt system which focuses on the piezo-actuators. The model includes hysteresis effects in the piezo elements and the position feedback control loop.
KEYWORDS: Mirrors, Telescopes, Actuators, Space telescopes, Off axis mirrors, Integrated modeling, Interfaces, Optical instrument design, Phase transfer function, Control systems
The Fast-Steering Secondary Mirror (FSM) of Giant Magellan Telescope (GMT) consists of seven 1.1m diameter segments with effective diameter of 3.2m. Each segment is held by three axial supports and a central lateral support with a vacuum system for pressure compensation. Both on-axis and off-axis mirror segments are optimized under various design considerations. Each FSM segment contains a tip-tilt capability for guiding to attenuate telescope wind shake and mount control jitter. The design of the FSM mirror and support system configuration was optimized using finite element analyses and optical performance analyses. The design of the mirror cell assembly will be performed including sub-assembly parts consisting of axial supports, lateral support, breakaway mechanism, seismic restraints, and pressure seal. . In this paper, the mechanical results and optical performance results are addressed for the optimized FSM mirror and mirror cell assembly, the design considerations are addressed, and performance prediction results are discussed in detail with respect to the specifications
The Fast-steering Secondary Mirror (FSM) of Giant Magellan Telescope (GMT) consists of seven 1.1 m diameter circular segments with an effective diameter of 3.2 m, which are conjugated 1:1 to the seven 8.4 m segments of the primary. Each FSM segment contains a tip-tilt capability for fast guiding to attenuate telescope wind shake and mount control jitter by adapting axial support actuators. Breakaway System (BAS) is installed for protecting FSM from seismic overload or other unknown shocks in the axial support. When an earthquake or other unknown shocks come in, the springs in the BAS should limit the force along the axial support axis not to damage the mirror. We tested a single BAS in the lab by changing the input force to the BAS in a resolution of 10 N and measuring the displacement of the system. In this paper, we present experimental results from changing the input force gradually. We will discuss the detailed characteristics of the BAS in this report.
The Fast Steering Secondary Mirror (FSM) for the Giant Magellan Telescope (GMT) will have seven 1.05 m diameter circular segments and rapid tip-tilt capability to stabilize images under wind loading. In this paper, we report on the assembly, integration, and test (AIT) plan for this complex opto-mechanical system. Each fast-steering mirror segment has optical, mechanical, and electrical components that support tip-tilt capability for fine coalignment and fast guiding to attenuate wind shake and jitter. The components include polished and lightweighted mirror, lateral support, axial support assembly, seismic restraints, and mirror cell. All components will be assembled, integrated and tested to the required mechanical and optical tolerances following a concrete plan. Prior to assembly, fiducial references on all components and subassemblies will be located by three-dimensional coordinate measurement machines to assist with assembly and initial alignment. All electronics components are also installed at designed locations. We will integrate subassemblies within the required tolerances using precision tooling and jigs. Performance tests of both static and dynamic properties will be conducted in different orientations, including facing down, horizontal pointing, and intermediate angles using custom tools. In addition, the FSM must be capable of being easily and safely removed from the top-end assemble and recoated during maintenance. In this paper, we describe preliminary AIT plan including our test approach, equipment list, and test configuration for the FSM segments.
The Giant Magellan Telescope (GMT) will be equipped with two Gregorian secondary mirrors; a fast-steering secondary mirror (FSM) for seeing-limited operations and an adaptive secondary mirror (ASM) for adaptive optics observing modes. The FSM has an effective diameter of 3.2 m and is comprised of seven 1.1 m diameter circular segments, which are conjugated 1:1 to the seven 8.4m segments of the primary mirror. Each FSM segment has a tip-tilt capability for fast guiding to attenuate telescope wind shake and jitter. The FSM is mounted on a two-stage positioning system; a macro-cell that positions the entire FSM segments as an assembly and seven hexapod actuators that position and drive the individual FSM segments. In this paper, we present a technical overview of the FSM development status. More details in each area of development will be presented in other papers by the FSM team.
KEYWORDS: Mirrors, Telescopes, Optical fabrication, Telescopes, Control systems, Prototyping, Control systems design, Space telescopes, Surface finishing, Manufacturing, Profilometers
The Giant Magellan Telescope (GMT) will be featured with two Gregorian secondary mirrors, an adaptive secondary mirror (ASM) and a fast-steering secondary mirror (FSM). The FSM has an effective diameter of 3.2 m and built as seven 1.1 m diameter circular segments, which are conjugated 1:1 to the seven 8.4m segments of the primary. Each FSM segment contains a tip-tilt capability for fine co-alignment of the telescope sub-apertures and fast guiding to attenuate telescope wind shake and mount control jitter. This tip-tilt capability thus enhances performance of the telescope in the seeing limited observation mode. As the first stage of the FSM development, Phase 0 study was conducted to develop a program plan detailing the design and manufacturing process for the seven FSM segments. The FSM development plan has been matured through an internal review by the GMTO-KASI team in May 2016 and fully assessed by an external review in June 2016. In this paper, we present the technical aspects of the FSM development plan.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.