Paper
27 December 2002 EUVL Square Mask Patterning with TaN Absorber
Pei-yang Yan, Andy Ma, Yi-Chiau Huang, Brigitte C. Stoehr, Juan Valdivia
Author Affiliations +
Abstract
Using TaN as extreme ultra-violet lithography (EUVL) mask absorber has been previously explored in wafer format. Due to substrate material difference between the square mask format and Si wafer format, e.g., electrical conductivity and thermal conductivity difference, etc., the etch process does not behave the same when mask substrate switches from the Si wafer to the square quartz substrates. With low thermal conductivity on quartz material and no backside cooling, mask etch prefers low power as compared to the Si wafer etch. In the study, we found that for a given source and bias power, the cooling of the substrate plays a role in TaN etch rate and selectivity to the buffer oxide layer. In this paper, we will present detailed study and comparison of TaN EUVL mask absorber etch characteristics for both the Si substrate and the square quartz substrate cases. The effect of source power, bias power, and backside cooling will also be discussed. The etchers used in study to etch TaN film on the wafer substrate and on the square format mask substrate have the similar configuration. With the optimized etch process, we have achieved good TaN etch profile with high etch selectivity to SiO2 buffer layer on the square quartz mask substrate.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pei-yang Yan, Andy Ma, Yi-Chiau Huang, Brigitte C. Stoehr, and Juan Valdivia "EUVL Square Mask Patterning with TaN Absorber", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.468102
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Photomasks

Silicon

Quartz

Semiconducting wafers

Extreme ultraviolet lithography

Scanning electron microscopy

Back to Top