Paper
17 December 2003 Mask CD uniformity improvement by dry etching loading effect correction
Jun Kotani, Toshiaki Yanagihara, Eiji Umeda, Takashi Senou, Yasutaka Kikuchi, Tsuyoshi Tanaka, Yoshimitsu Okuda
Author Affiliations +
Abstract
Proximity effect and foggy effect correction is performed to obtain an ideal CD distribution of resist patterns within a mask plate. However, gobal loading effect in dry etching causes an additional CD distribution of Cr patterns. In order to satisfy the CD distribution specification in 65nm node, CD distribution in global loading effect should be improved to be 2nm or less. To accomplish the goal, a correction system of dry etching loading effect has been developed. The correction is performed by sizing patterns in each writing field (1mm x 1mm). The sizing amount, minimum step of 1nm, is calculated according to the parameters, which are defined by measuring the test patterns. The loading effect is evaluated by measuring the CD difference of 1 micron lines and spaces in 80mm x 40mm clear area and that in completely dark area, which is an extremely severe case. The writer is JEOL/JBX-3030, and the dry etcher is Unaxia/VLR700GIII in the experiment. By applying this correction, CD uniformity caused by the global loading effect can be reduced to 2nm or less.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun Kotani, Toshiaki Yanagihara, Eiji Umeda, Takashi Senou, Yasutaka Kikuchi, Tsuyoshi Tanaka, and Yoshimitsu Okuda "Mask CD uniformity improvement by dry etching loading effect correction", Proc. SPIE 5256, 23rd Annual BACUS Symposium on Photomask Technology, (17 December 2003); https://doi.org/10.1117/12.524430
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dry etching

Chromium

Data conversion

Photomasks

Software development

Data corrections

Electronics

RELATED CONTENT

CAR dry etching technology to produce 0.13 um reticle
Proceedings of SPIE (August 01 2002)
In situ selectivity monitor for dry etch of photomasks
Proceedings of SPIE (May 11 2009)
Evaluation of loading effect of NLD dry etching
Proceedings of SPIE (July 19 2000)
Evaluation of dry etching and defect repair of EUVL mask...
Proceedings of SPIE (December 06 2004)
Bilevel resist process for 1-Gb DRAM reticles
Proceedings of SPIE (July 24 1996)

Back to Top