Optimization of EUVL reticle thickness for image placement accuracy

Liang Zheng; Andrew R. Mikkelson; Amr Y. Abdo; Roxann L. Engelstad; Edward G. Lovell; Thomas J. White

doi:10.1117/12.518062

17 December 2003 Optimization of EUVL reticle thickness for image placement accuracy

Liang Zheng, Andrew R. Mikkelson, Amr Y. Abdo, Roxann L. Engelstad, Edward G. Lovell, Thomas J. White

Proceedings Volume 5256, 23rd Annual BACUS Symposium on Photomask Technology; (2003) https://doi.org/10.1117/12.518062
Event: Photomask Technology, 2003, Monterey, California, United States

Abstract

Extreme ultraviolet lithography (EUVL) is one of the leading candidates for next-generation lithography in the sub-65 nm regime. The International Technology Roadmap for Semiconductors proposes overlay error budgets of 18 nm and 13 nm for the 45 nm and 32 nm nodes, respectively. Full three-dimensional finite element (FE) models were developed to identify the optimal mask thickness to minimize image placement (IP) errors. Five thicknesses of the EUVL reticle have been investigated ranging from 2.3 mm to 9.0 mm. The mask fabrication process was simulated, as well as the e-beam mounting, pattern transfer, and exposure mounting, utilizing FE structural models. Out-of-plane distortions and in-plane distortions were tracked for each process step. Both electrostatic and 3-point mounts were considered for the e-beam tool and exposure tool. In this case, increasing the thickness of the reticle will reduce the magnitude of the distortions. The effect of varying the reticle thickness on chucking was also studied. FE models were utilized to predict how changing the reticle thickness would affect the overall clamping response. By decreasing the reticle thickness (and therefore the effective bending stiffness), the deformed reticle is easier to flatten during chucking. In addition, the thermomechanical response of the reticle during exposure was investigated for different reticle thicknesses. Since conduction to the chuck is the main heat dissipation mechanism, decreasing the reticle thickness results in more energy being conducted away from the reticle, which reduces the maximum temperature rise and the corresponding thermal distortion. The FE simulations illustrate the optimal thickness to keep IP errors within the allotted error budget as well as provide the necessary flatness during typical chucking procedures.

Citation Download Citation

Liang Zheng, Andrew R. Mikkelson, Amr Y. Abdo, Roxann L. Engelstad, Edward G. Lovell, and Thomas J. White "Optimization of EUVL reticle thickness for image placement accuracy", Proc. SPIE 5256, 23rd Annual BACUS Symposium on Photomask Technology, (17 December 2003); https://doi.org/10.1117/12.518062

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available