Paper
18 September 2008 Optimization of pinhole cameras for emission tomographic systems
Author Affiliations +
Abstract
Many detection systems for acquiring two-dimensional projections in emission tomography (like SPECT, micro-SPECT, micro-XRF) are based on pinhole optics and a photon counting array detector. Practically all such detection systems use a standard round pinhole with cone-shaped openings on both sides to improve efficiency for inclined beams. Theoretical analysis shows that a square pinhole with pyramidal openings can improve sensitivity and efficiency of photon detection of such detectors. Replacing a round/cone pinhole by a square/pyramidal one increases the number of counted photons in the central part of the image by 25% and even more in the sides and in the corners of the imaging area. In the case of multi-pinhole optics, square pinhole shape allows better filling of used detector area without overlaps of partial images. Experimental comparison between round and square pinholes has been done on a micro-XRF setup. The imaging geometry parameters are identical in both cases. Performance is evaluated on efficiency and spatial resolution. The tests show significant efficiency improvement in the case of using a camera with a square pinhole shape.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Sasov "Optimization of pinhole cameras for emission tomographic systems", Proc. SPIE 7078, Developments in X-Ray Tomography VI, 70781R (18 September 2008); https://doi.org/10.1117/12.793211
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Cameras

Beam shaping

Coded apertures

Photon counting

Spatial resolution

Tomography

Back to Top