Prof. Evgeny E. Gurevich Profile

Prof. Evgeny E. Gurevich

at Fachhochschule Münster

SPIE Involvement:

Author

Publications (17)

Proceedings Article | 27 November 2023 Paper

The study of laser scribing for the perovskite solar cells module

Quan Tang, Lunzhen Hu, Qingchuan Guo, Yuqiang Hou, Hao Wang, Jun Zhu, Lihui Zhou, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 12762, 1276207 (2023) https://doi.org/10.1117/12.2687037

KEYWORDS: Perovskite, Laser processing, Solar cells, Glasses, Resistance, Pulsed laser operation, Femtosecond phenomena, Solar energy, Photomicroscopy, Laser optics

Read Abstract +

Proceedings Article | 27 November 2023 Paper

Studies of laser cutting on glass by picosecond laser

Yetao Liu, Lunzhen Hu, Qingchuan Guo, Yuqiang Hou, Liang Lü, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 12762, 1276205 (2023) https://doi.org/10.1117/12.2685881

KEYWORDS: Laser cutting, Glasses, Picosecond phenomena, Beam diameter, Bessel beams, Microscopes, Laser processing, Laser optics, Laser applications, Laser ablation

Read Abstract +

Proceedings Article | 27 November 2023 Paper

Femtosecond laser processing of silicon in liquid: diverse nanomorphologies and applications

Yulia Borodaenko, Stanislav Gurbatov, Svetlana Khonina, Evgeny Gurevich, Aleksandr Kuchmizhak

Proceedings Volume 12762, 127620R (2023) https://doi.org/10.1117/12.2689047

KEYWORDS: Silicon, Polarization, Laser processing, Liquids, Laser irradiation, Nanoparticles, Laser ablation, Femtosecond lasers

Read Abstract +

Proceedings Article | 28 December 2022 Presentation + Paper

Laser performance of LD side-pumped Er: YSGG crystal rods with different diameters

Lunzhen Hu, Dunlun Sun, Yuqiang Hou, Evgeny Gurevich, Andreas Ostendorf, Qingchuan Guo

Proceedings Volume 12310, 123100B (2022) https://doi.org/10.1117/12.2641626

KEYWORDS: Crystals, Laser crystals, Thermal effects, Semiconductor lasers, Pulsed laser operation, Mid-IR

Read Abstract +

Proceedings Article | 4 March 2022 Presentation + Paper

Effect of laser shock peening with square laser spot on hardness and residual stress of Ti6Al4V alloy

Hao Wang, Jan Kaufman, Jan Brajer, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 11994, 119940F (2022) https://doi.org/10.1117/12.2611090

KEYWORDS: Laser processing, Laser applications, Metals, Titanium

Read Abstract +

Proceedings Article | 5 March 2021 Paper

Application of nanoindentation technique to test surface hardness and residual stress of NiTi alloy after femtosecond laser shock peening

Hao Wang, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 11679, 116790J (2021) https://doi.org/10.1117/12.2593092

KEYWORDS: Femtosecond phenomena, Metals, Coating

Read Abstract +

Proceedings Article | 10 October 2020 Paper

Laser shock peening on high-strength steel

Hao Wang, Sören Keller, Yongtao Bai, Nikolai Kashaev, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 11546, 115460L (2020) https://doi.org/10.1117/12.2574988

KEYWORDS: Pulsed laser operation, Laser energy, Corrosion, Resistance, Laser processing, Laser drilling

Read Abstract +

Proceedings Article | 14 April 2020 Paper

Mode-locked diode lasers as sources for two-photon polymerization

N. Surkamp, G. Zyla, E. Gurevich, C. Esen, A. Klehr, A. Knigge, A. Ostendorf, M. Hofmann

Proceedings Volume 11349, 113490G (2020) https://doi.org/10.1117/12.2555890

KEYWORDS: Semiconductor lasers, Two photon polymerization, Mode locking, Laser systems engineering, Pulsed laser operation, Photosensitive materials, Polymerization, Scanning electron microscopy, Image analysis, Optical amplifiers

Read Abstract +

In this study, we use a hybrid mode-locked external cavity diode laser with subsequent amplification and pulse compression. The system provides laser pulses of 440 fs width (assuming a sech² pulse shape) and 160 mW average output power at a repetition rate of 383.1 MHz. The laser oscillator consists of a double quantum well laser diode with a gain segment of 1080 μm length and an absorber element of 80 μm lengths. The chip’s back facet is covered with a high reflective coating, the front facet with an anti-reflective coating. The resonator itself is operated in a collimated geometry and folded by two dielectric mirrors. The used output coupler provides a transmission of 20 percent, which is coupled into a tapered amplifier. Two Faraday isolators are used to decouple the laser and the amplifier from any back reflections. Subsequently, the pulses are compressed using a single pass Martinez type pulse compressor. Experiments on Two-Photon Polymerization were conducted on a conventional setup consisting of a 2D galvo-scanner system with an attached microscope objective. The oil immersion objective (NA =1.4) focusses the light pulses through a cover glass into a droplet of the photosensitive material. Process monitoring can be achieved by observing the image on a camera placed behind a semi-transparent mirror in front of the galvo-scanner. Using this experimental setup, test structures that consist of free-hanging lines supported by cuboids were produced. In addition, a procedure for automated linewidth measurements is outlined and used for analyzation of the generated structures. This work shows that mode-locked diode lasers can be used for the fabrication of microstructures by Two-Photon Polymerization. Typically used Ti:Sapphire or fiber lasers can be replaced by mode-locked diode lasers for Two-Photon- Polymerization. This allows for much cheaper Two-Photon-Polymerization systems and therefore, may open this field for more application-based research groups.

Proceedings Article | 2 March 2020 Presentation + Paper

Microhardness and microabrasion behaviour of NiTi shape memory alloy after femtosecond laser shock peening without coating in air

Hao Wang, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 11273, 1127301 (2020) https://doi.org/10.1117/12.2543550

KEYWORDS: Surface roughness, Shape memory alloys, Laser ablation, Laser energy

Read Abstract +

Proceedings Article | 22 February 2018 Presentation + Paper

Printing structural colors via direct laser writing

Gordon Zyla, Alexander Kovalev, Evgeny Gurevich, Cemal Esen, Andreas Ostendorf, Stanislav Gorb

Proceedings Volume 10544, 105440W (2018) https://doi.org/10.1117/12.2289820

KEYWORDS: Two photon polymerization, Polymers, Optical properties, Printing, Organisms, Multilayers, Biophotonic applications, Biomimetics, Disordered photonic crystals

Read Abstract +

SPIE Journal Paper | 31 October 2017

Optical assembly of microsnap-fits fabricated by two-photon polymerization

Jannis Köhler, Yunus Kutlu, Gordon Zyla, Sarah Ksouri, Cemal Esen, Evgeny Gurevich, Andreas Ostendorf

OE, Vol. 56, Issue 10, 105105, (October 2017) https://doi.org/10.1117/12.10.1117/1.OE.56.10.105105

KEYWORDS: Two photon polymerization, Optical fabrication, Microsystems, Optical tweezers, Scanning electron microscopy, Photosensitive materials, Spherical lenses, Polymers, Optical engineering, Holography

Read Abstract +

Proceedings Article | 30 August 2017 Presentation + Paper

Graphene oxide reduction induced by femtosecond laser irradiation

Maren Kasischke, Stella Maragkaki, Sergej Volz, Evgeny Gurevich, Andreas Ostendorf

Proceedings Volume 10356, 103560M (2017) https://doi.org/10.1117/12.2274976

Read Abstract +

Proceedings Article | 17 February 2017 Presentation + Paper

Influence of solvent mixture on the ablation rate of iron using femtosecond laser pulses

Alexander Kanitz, Jan Hoppius, Andreas Ostendorf, Evgeny Gurevich

Proceedings Volume 10092, 100921D (2017) https://doi.org/10.1117/12.2254444

KEYWORDS: Laser ablation, Nanoparticles, Liquids, Iron, Femtosecond phenomena, Laser cutting, Laser processing, Ultrafast phenomena, Materials processing, Bioalcohols, Interferometers, Control systems

Read Abstract +

Proceedings Article | 4 March 2016 Paper

Throughput optimization for laser micro structuring

Jan Hoppius, A. Kanitz, E. Gurevich, A. Ostendorf

Proceedings Volume 9736, 97360O (2016) https://doi.org/10.1117/12.2216849

KEYWORDS: Laser ablation, Laser processing, Pulsed laser operation, Micromachining, Resistance, Ultrafast phenomena, Laser systems engineering, Materials processing, Thermal effects, Laser energy, Copper, Metals, Femtosecond phenomena, Particles, Dielectrics

Read Abstract +

Proceedings Article | 13 November 2014 Paper

Ex-situ preparation of high-conductive polymer/SWNTs nanocomposites for structure fabrication

Qingchuan Guo, Reza Ghadiri, Thomas Weigel, Andreas Aumann, Evgeny Gurevich, Cemal Esen, Yan Li, Wei Cheng, Boris Chichkov, Andreas Ostendorf

Proceedings Volume 9277, 927714 (2014) https://doi.org/10.1117/12.2071870

KEYWORDS: Single walled carbon nanotubes, Polymers, Two photon polymerization, Composites, Nanocomposites, Raman spectroscopy, Polymerization, Nanolithography, Femtosecond phenomena, Laser processing

Read Abstract +

Proceedings Article | 16 September 2014 Paper

Optical tweezers as manufacturing and characterization tool in microfluidics

J. Köhler, R. Ghadiri, S. I. Ksouri, E. Gurevich, A. Ostendorf

Proceedings Volume 9164, 91642F (2014) https://doi.org/10.1117/12.2063080

KEYWORDS: Particles, Magnetism, Microfluidics, Optics manufacturing, Optical tweezers, Spatial light modulators, Holography, Silica, Calibration, Liquids

Read Abstract +

Proceedings Article | 24 March 2014 Paper

Impact of solvent mixture on iron nanoparticles generated by laser ablation

M. Chakif, O. Prymak, M. Slota, E. Heintze, E. Gurevich, C. Esen, L. Bogani, M. Epple, A. Ostendorf

Proceedings Volume 8955, 895507 (2014) https://doi.org/10.1117/12.2037682

KEYWORDS: Magnetism, Iron, Particles, Laser ablation, Transmission electron microscopy, Crystals, Nanoparticles, Oxides, Femtosecond phenomena, Ferromagnetics

Read Abstract +

Showing 5 of 17 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years